Jonsered FC 2145S manual Technical Data, Technical data

Page 32

TECHNICAL DATA

Technical data

	BC 2145	FC 2145	FC 2145 S
Engine
Cylinder displacement, cu.in/cm3	2,75/45	2,75/45	2,62/43
Cylinder bore, inch/mm	1,65/42	1,65/42	1,61/41
Stroke, inch/mm	1,26/32	1,26/32	1,26/32
Idle speed, rpm	2800	2800	2800
Recommended max. speed, rpm	12500	13500	13500
Speed of output shaft, rpm	9000	10500	10500
Max. engine output, acc. to ISO 8893, kW/ rpm	2,0/9000	2,0/9000	2,1/9600
Catalytic converter mufﬂer	Yes	No	Yes
Speed-regulated ignition system	Yes	Yes	Yes
Ignition system
Manufacturer/type of ignition system	SEM AM	SEM AM	SEM AM
Spark plug	Champion RCJ 6Y	Champion RCJ 6Y	Champion RCJ 6Y
Electrode gap, inch/mm	0,02/0,5	0,02/0,5	0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor	Zama C1Q	Zama C1Q	Zama C1Q
Fuel tank capacity, US pint/litre	1,9/0,9	1,9/0,9	1,9/0,9
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg	18,0/8,2	18,5/8,4	18,3/8,3
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A),
min/max:	97/103	98/103	99/104
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s2
At idle, left/right handles, min.:	3,8/4,0	3,8/4,2	3,3/3,5
At idle, left/right handles, max.:	3,8/4,0	3,8/4,2	3,3/3,5
At max. speed, left/right handles, min.:	1,7/1,9	1,8/2,3	1,5/2,1
At max. speed, left/right handles, max.:	2,1/2,2	2,4/2,5	1,7/2,7

Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment ﬁtted. The table indicates the highest and lowest values.

32 – English

Image 32

Contents Operator’s manual EPA KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the clearing saw? BCWhat is what on the clearing saw? FC 2145, FC 2145 S General Safety Precautions Personal protective equipmentThrottle lock Machine′s safety equipmentStop switch Cutting attachment guard Vibration damping systemQuick release MufﬂerLocking nut Locking screwSharpening grass cutters and grass blades Cutting equipmentCutting equipment Sharpening the saw blade Trimmer headAssembly Assembling the handlebar and throttleTransport position, handlebar FC 2145, FC 2145 SFitting blades and trimmer heads Fitting the blade guard and saw blade Fitting the trimmer guard and trimmer head Trimmy SIIStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Adjusting the harness Vector harnessCorrect balance Grass clearingFuel Fuel safetyFuel Handling Fueling MixingStarting and Stopping Check before startingStarting and stopping Cold engineStarting StoppingBasic safety rules Working TechniquesGeneral working instructions ABC of clearingForestry clearing using a saw blade Working methodsGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingMaintenance CarburetorFine adjustment of the idle speed T Correctly adjusted carburetorAdjusting the start throttle speed BC High speed jet HAir ﬁlter MufﬂerCooling system Cleaning the air ﬁlter Bevel gearDrive shaft Spark plugTemperature 0C 32F or colder Winter useMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsPoly Trim 095-.130 Clic 35-50 NMPage Mm 9,0 m Mm 7,5 m Mm 6,0 m 15 cm 10 m 10 cm 15 cm Clic 1088930-95 ´z*x¶5¢¨ ´z*x¶5¢¨