J-Allure
TV Installation (Units with TV)
Remove drip shield. Connect power cord, audio cable antenna/cable TV. Hook up fan power lines with red to red and black to black wires. Tighten cable tie and cut off excess. Tighten cable tie with anchor (not supplied) to the TV power cord. It is not necessary to attach anchor to drip shield; the cable tie and anchor are used to ensure the TV power cord remains inside drip shield. Position the drip shield over TV and secure. Close the door and make sure the sensor hole on the door aligns with the TV sensor. If they do not align, adjust the TV position till they are aligned. Secure the door. Reinstall hand held shower holder if removed. Apply sealant to mounting holes if holder was removed completely.
DRIP SHIELD WIRING | TV CONNECTIONS |
DRIP SHIELD
FAN |
RED |
AUDIO |
CABLE |
HEADPHONES |
BLACK
TV POWER CORD
CABLE TV
AUDIO CABLE (HEADPHONE)
CABLE TIE
IF THE TV HAS BEEN MOVED IN SHIPPING, LOOSEN ADJUSTMENT SCREWS AND ADJUST THE TV SO IT IS CENTERED IN WINDOW.
TO CABLE TV LINE
DC POWER INPUT
DRIP SHIELD
| LCD TV |
ADJUSTMENT | BEZEL |
SCREWS |
|
(4 PER DIRECTION) |
|
| POWER, AUDIO AND |
| CABLE TV/ANT. CABLES |
13