OPERATING INSTRUCTIONS
CENTER PANEL
System control is provided by the electronic display located on the center panel.
The display is used to start up the five functions of the unit: the hand held shower, the fixed shower, the hydromassage (all jets), hydromassage (pulsed jets), and the steam bath. The display is composed of clear symbols to identify the five functions.
STEAM | JETS START | PULSED JETS |
START BUTTON | BUTTON | START BUTTON |
R
WHIRLPOOL BATH
OFF
HAND HELD SHOWER | STATIONARY SHOWER OFF BUTTON |
START BUTTON | START BUTTON |
FIGURE 1. CENTER PANEL AND DISPLAY
Starting Any Function
The mixer control valve must be ON for the functions of the center panel to be operational. After the mixer valve has been set and is ON, press any button to start that function. The steam function can be ON with any other function. Other functions can only be ON one at a time. Pressing the OFF button turns all functions OFF.
Mixer Control
To adjust the temperature turn the mixer handle as shown in Figure 2. When exiting the
HOT
COLD
OFF
FIGURE 2. MIXER CONTROL
Hand Held Shower
Pressing the Hand Held Shower button once activates hand held shower and pressing a second time deactivates the shower. Pressing the OFF button or any other button will turn the shower mode OFF.
Stationary Shower
Pressing Stationary Shower button once activates the shower and pressing a second time deactivates the shower. Pressing the OFF button or any other button except steam will turn the shower mode OFF.
21