REMOTE CONTROLE UNIT
OPERATION
The supplied remote control unit is a system remote control unit for Marantz AV components.
The POWER button , numeric buttons and control buttons are used in common across different input source components.
The input source controlled with the remote control unit changes when one of the input selector buttons is pressed.
•Example: To select the DVD as the input source and play the DVD player.
Press the DVD button twice within 2 seconds.
The input selector of the SR4300 is switched to DVD and the remote control unit is set for control of the DVD player.
Press the button on the remote control unit.
FUNCTION AND OPERATION
z
⁄4
xPOWER 
SLEEP
c |
| MEMO | CLEAR |
| ⁄5 |
|
|
|
| ||
|
| AUTO |
|
| DTS |
v |
| 1 | 2 | 3 |
|
TREBLE | CS | EX/ES |
| DSP | |
|
| 4 | 5 | 6 | ⁄6 |
|
| 2CH |
| 6.1CH | |
|
| ST |
|
| |
b |
| 7 | 8 | 9 | ⁄7 |
BASS | F.DIRECT | A/D |
| ||
n |
|
| 0 |
|
|
|
|
| OFF | ⁄8 | |
SETUP/T.TONE |
|
| MENU | ||
m |
|
|
|
|
|
|
| OK |
|
| ⁄9 |
|
|
|
|
| |
, |
|
|
|
|
|
. | MUTE |
| VOLUME | ¤0 | |
| NIGHT |
|
| ||
|
|
|
| ||
|
|
| CHANNEL/SKIP |
| |
⁄0 | TV | CDR | TUNE/SEARCH |
| |
|
|
|
| ||
| DVD | MD |
|
|
|
|
|
| MODE | PTY |
|
⁄1 | VCR1 | TAPE |
|
| ¤1 |
| VCR2 | DISP./RDS | P.SCAN |
| |
| DSS | CD |
|
|
|
⁄2 |
|
|
| ATT. |
|
TUNER | AMP |
|
| ¤2 | |
⁄3 | SYSTEM REMOTE CONTROLLER RC4300SR | ||||
|
|
|
|
| |
zInfrared window
Outputs and inputs an infrared control signals.
xMEMO(Memory) button
Press this button to enter the tuner preset memory numbers and station names.
cPOWER button
Press to switch the power of the SR4300 ON or OFF after pressing the AMP button.
vTREBLE (Up) / (Down) buttons
These buttons are used to adjust the tone control of high frequency sound for left and right speakers.
bBASS (Up) / (Down) buttons
These buttons are used to adjust the tone control of low frequency sound for left, right and subwoofer speakers.
nF.(Frequency) DIRECT button
Press this button to change tuner mode Frequency Direct Call.
mSETUP / T.TONE button
Test tone function is used for adjusting the balance between the volume levels of speaker channels.
Press AMP button and press this button to call SPEAKER LEVEL setup menu.
Press the button again to stop the pink noise generation.
,S- ( Source) DIRECT button
When this button is pressed, the tone control circuit is bypassed as well as Bass Management.
.MUTE button
Press this button decrease the sound temporarily .
Press this button again to return to the previous sound level.
⁄0NIGHT button
Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night.
⁄1Input selector buttons/ FUNCTION
SELECTOR buttons for VIDEO component
⁄2Input selector buttons/ FUNCTION
SELECTOR buttons for AUDIO component
Press one of these buttons once or twice to select a particular source component. For example, to set the receiver to the DVD input, press the DVD button twice within 2 seconds.
⁄3AMP button
To select the surround mode of the SR4300, press this button previously.
⁄4CLEAR button
Press this button to cancel the station memory setting mode or preset scan tuning.
⁄5SLEEP (sleep timer) button
This button is used for setting the sleep timer. It can be operated the same way as the button in unit.
ENGLISH
9