FRONT PANEL
| !3 | !4 |
| !5!6 | !7 |
| |
q w | e | r | t | y | u i | o | |
| AV SURROUND RECEIVER SR4300 |
|
|
|
|
|
|
SURROUND |
|
|
|
|
|
| VOLUME |
|
|
|
|
|
| DOWN | UP |
| CLEAR | MEMORY | TUNING/PRESET | F/P | MODE |
|
|
| A/D | DIMMER | MUTE |
|
| ||
STANDBY |
|
|
|
|
|
|
|
POWER ON / STNDBY | PHONES6.1CH-INTV | DVDVCR1 | DSS/VCR2 | CDR/MDTAPE | CD | TUNER |
|
ENGLISH
!2 !1
qPOWER switch and STANDBY indicator
When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights.
When the STANDBY indicator is turned on, the unit is NOT disconnected from the AC power.
wSURROUND MODE Selector knob
When this knob is turned, the surround mode is switched sequentially.
Note:
• Available surround mode is depending on the input signal.
!0
uMODE button
Press this button to select the auto stereo mode or mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
iInfrared receiving (IR) sensor window
This window receives infrared signals for the remote control unit.
oVOLUME control knob
Adjusts the overall sound level. Turning the control clockwise increases the sound level.
eCLEAR button
Press this button to cancel the
rMEMORY button
Press this button to enter the tuner preset memory numbers or station names.
tTUNING UP / DOWN buttons
Press thses buttons to change the frequency or the preset number.
yF/P (FREQUENCY / PRESET) button
During reception of AM or FM, you can change the function of the UP/ DOWN buttons for scanning frequencies or selecting preset stations by pressing this button.
!0INPUT FUNCTION SELECTOR buttons (AUDIO/ VIDEO)
These buttons are used to select the input sources.
The video function selector, such as TV, DVD, VCR1 and DSS/VCR2, selects video and audio simultaneously.
Audio function sources such as CD, TAPE, CDR/MD, TUNER, and
This feature (Sound Injection) combines a sound from one source with a picture from another.
Choose the video source first, and then choose a different audio source to activate this function.
Press TUNER button to switch the between FM or AM.
!16.1CH IN button
Press this button to select the output of an external multi channel decoder. Press this button again to return the preivious function.
5