Marantz SR4300 manual Name Input of the Preset Station, ← Down

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel to be entered using alphanumeric characters.

Before name inputting, need to store preset stations with the preset memory operation.

4.4. 2. 5. 6. 5.

AV SURROUND RECEIVER SR4300

SURROUND

3.							S DIRECT
2.	POWER			SLEEP		5.		MUTE	VOLUME
		MEMO	CLEAR					NIGHT
5.		AUTO			DTS			CHANNEL/SKIP
		1	2	3			TV	CDR
	TREBLE	CS	EX/ES		DSP			TUNE/SEARCH
6.
		4	5	6			DVD	MD
						4.
		M-CH	2CH		6.1CH			MODE	PTY
		ST			-IN		VCR1	TAPE
		7	8	9
	BASS	F.DIRECT	A/D				VCR2	DISP./RDS	P.SCAN
			0				DSS	CD

ATT

OFF

1. Recall the preset number to be inputted name with the method described in “RECALLING” a preset station.

2. Press the MEMORY button on the front panel or press MEMO on the remote for more than 3 seconds.

3. The left most column of the station name indicator flashes, indicating the character entry ready status.

4. When the SELECT knob is turned or press 5 / 6 button on the remote, alphabetic and numeric characters will be displayed in the following order:

A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → + → / → (Blank) → A

UP →

←DOWN

To clear the input charcter, press the CLEAR button on the front panel or on the remote.

5. After selecting the first character to be entered, press the MEMORY button on the front panel, or press MEMO button on the remote.

The entry in this column is fixed and the next column starts to flash. Fill the next column same as.

To move back and forth between the characters, press the TUNING/button or press 4 / ¢ buttons on the remote.

Note:

•Unused columns should be filled by entering blanks.

6.To save name, press the MEMORY button, press MEMO button on the remote for more than 2 seconds.

ENGLISH

35