Marantz SR4300 manual Speakers Level, 9dB 10dB SW -15 dB

ENGLISH

SPEAKERS LEVEL	2. Using the and cursor buttons, adjust the volume level of the
Here you will set the volume for each speaker so that they are all	noise from the center speaker so that it is the same level as the
heard by the listener at the same level.	front left speaker (Note that this can be adjusted to any level
Note:	between –10 and +10 dB in 1dB intervals).

•The speaker level settings is not available in 6.1channel input mode and S-Direct mode.

TEST MODE : Selects “MANU (manual)” or “AUTO” for generating mode of test toneorcursor button.

If you select “AUTO” by pressing thebutton, the test tone will be cycled through in a circular pattern which is L (Left) →C (Center) →R (Right) →SR (Surround Right) →SB (Surround Back) →SL (Surround Left) →SW (Subwoofer →L →.. increments of 2 seconds for each channel.

Using theandcursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker.

When you select “TO MAIN MENU” by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the or cursor button to select “EXIT” then press the OK button to exit the SETUP MENU.

Or press theorcursor button to select “RETURN” then press the OK button to return the previous “SPEAKER DISTANCE” setup.

If you select “MANU”, adjust the output level of each speaker as follow.

M-CH	2CH	6.1CH
ST		-IN

Maximum

1 dB interval

Reference

1 dB interval

Minimum

+10dB

+9dB

button

0dB

button

-9dB

-10dB

(SW -15 dB)

2.	5.	7	8	9
		BASS	F.DIRECT	A/D
			0
				OFF
1.	5.	SETUP/T.TONE		MENU
			OK
1. 3.	5.	S-DIRECT
					5.
		MUTE		VOLUME

1. When you select “MANUAL” in T.MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the button. This unit will emit the pink noise from the center speaker.

MENU STRUCTURE of Speaker Level setup

Direct selec	Speaker
by remote	Distance	Test Tone mode
control	setup

3. Press thecursor button again. This unit will now emit the pink noise from the front right speaker.

4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

5. When you select “TO MAIN MENU” by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button . Or press theorcursor button to select “EXIT” then press the OK button to exit the SETUP MENU.

Or press theorbutton to select “RETURN” then press the OK button to return the previous “SPEAKER DISTANCE” setup.

Notes:

•Speakers that you selected “None” for in the Speaker Size Setup menu will not appear.

•The setup level for each channel is memorized for reproduction in all surround mode.

•To adjust the speaker levels for 6.1-channel input sources, you will need to use the 6.1CH Level Input setup menu.

	MANU	AUTO
		(Auto)
	Speaker
		SW
Speaker	L	C	R
Level setup
		Listening
	SL	Positiom	SR
		SB
	TO MAIN MENU	RETURN	EXIT
	MAIN	Speaker	exit SETUP
	MENU	Distance setup	MENU

22