Marantz SR4300 manual Enter the Desired Menu Item Setup Menu, D1AUTO to D4AUTO Digital Auto mode

ENTER THE DESIRED MENU ITEM OF THE

SETUP MENU

	M-CH	2CH	6.1CH
	ST		-IN
	7	8	9
BASS	F.DIRECT	A/D

0 EXIT

	OFF
SETUP/T.TONE	MENU

3.

4. OK

S-DIRECT

			5.
	MUTE		VOLUME
		NIGHT
		CHANNEL/SKIP
	TV	CDR
		TUNE/SEARCH
	DVD	MD
		MODE	PTY
	VCR1	TAPE
	VCR2	DISP./RDS	P.SCAN
	DSS	CD
	2.		ATT.
	TUNER	AMP
	SYSTEM REMOTE CONTROLLER RC4300SR
1.	Turn on this unit.
2.	Press the AMP button to set the amp mode.
3.	Press the MENU button or the OK button to enter the SETUP
4.	MENU.
	Press the or cursor button to select the MAIN MENU item.
5.	Press the OK button or the MENU button to enter the desired

menu item.

After finishing all setup, press the MENU OFF button to exit the

SETUP MENU.

1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT)

Four digital inputs can be assigned as the desired source.

Use this menu to select the digital input jack to be assigned to the input source.

The Input Setup consists of 9 items, which are as below.

• D1AUTO to D4AUTO : Digital AUTO mode

If the input signal from the selected source is digital signal, this unit chooses a digital input automatically.

• DIG.1 to DIG.4 : Digital FIXED mode

The SR4300 chooses a digital input regardless of a input signal from the selected source.

• ANA : Analog mode

Use this menu to select the digital input jack to be assigned to the input source.

M-CH	2CH	6.1CH
ST		-IN

	4. 5.			7	8	9
				BASS	F.DIRECT	A/D
					0
						OFF
			SETUP/T.TONE			MENU
	1. 3. 5.				OK
			S-DIRECT
				MUTE		VOLUME	2. 5.
					NIGHT
1.	Select “1.INPUT” in SETUP MAIN MENU with the or cursor
2.	button.
	Press the OK button to enter the menu.
3.	Press the	or	cursor button to select the input source.
4.	Press or	cursor button to select the input function.
5.	Select “DxAUTO”,			“DIG.x” or “ANA” for input sources.
	If you finish these setup, press the or						cursor button to select
	“TO MAIN MENU” then press the OK button to return the SETUP
	MAIN MENU.
	Or press the		or	cursor button to select “EXIT” then press the

OK button to exit the SETUP MENU.

Notes:

•When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input.

•If “Dx-AUTO” is selected and a DVD, compact disc or LD is fast forwarded during playback, decoded signals may produce a skipping sound. In such cases, change the setting to DIGITAL.

•Same digital input function cannot be set. In this case, the previous setting is set to ANALOG. Same digital input number cannot be set in Digital AUTO mode and Digital Fixed mode. For example, D1AUTO and DIG.1 are not set at same time.

ENGLISH

19