TRACTOR PREPARATION | - |
| ||||
|
|
| ||||
| HARDWARE BAG CONTENTS | 2 |
| |||
| QNT'Y |
| DESCRIPTION | 2 |
| 7/ls" lockwasher |
| h " | 4 |
| |||
5 | lynchpin | 6 |
| l ! " flat washer | ||
2 | 1Omm x 30mm hex hd capscrew | 4 |
| 1 s lock washer | ||
2 | 12mm x 25mm hex hd capscrew | 4 |
| |||
2 | lh" hex hd capscrew | 4 |
| 5/16"lockwasher | ||
16 | #11 clipxpin | 2 |
| VIS"flatwasher | ||
12 | 3/4xl'/4 0ga. machine bushing | 2 |
| |||
2 | 2 |
| 54s" flatwasher | |||
2 | 98" flat washer | 2 |
| # 2 hose clamp | ||
2 | 1 |
| nylon tie |
TRACTOR PREPARATION
This loader is not intended to be used with any other attachments mounted on tractor.
REAR COUNTER WEIGHT
m1 --DO NOT EXCEED THE RATING FOR MAXIMUM GROSSVEHICLE WEIGHT.
REFER TO OWNER'S MANUAL PROVIDED WITH TRACTOR.
The use of adequate rear countenveight is required for proper loader stability.
Referto Tractor Owner's Manual for specific recommendations on counterweightingtractor.
Weight addedto the rear of the tractor providesbettertraction and easier, more efficient loader operation. The tractor must be counterweightedby installation of rear weights.
Additional counterweight requirements will vary with loader attachments and equipment applications.
specific conditionsmaynot permitsafeuseof loader at loaderrating | |||
|
|
| or may require more carefully restrictedOperationat the rated load. |
|
|
|
The tractor ROPS system must be in place and used properly to ensure adequate operator protection.
LOADER HYDRAULIC SYSTEM
Follow recommendations in this operator's manual for hydraulic fluid specifications.
TRACTOR TIRES
Selection of tires should be restricted to.tire recommendations as specified by your Tractor owner's manual.
Ag tires are recommendedwhen using the front loader
TIRE INFLATION
Front tires must be maintainedat the maximum recommendedinflation with the added weight of loader and material. Ag Tire pressure 34 psi.
Rear tires must be maintained at equal pressure within the recommended tire inflation range. Ag Tire pressure 24 psi.
10