Honda Power Equipment FL5540K0 manual Loader Installation

LOADER INSTALLATION

LOADER INSTALLATION

INOTE: Install sub-frame and weights (Page

13- 17).

The sub-frame, masts and main frame are assembled. All cylinders and hoses are attached to the loader frame and hydraulic pump.

1.Move the tractor centrally between the masts.

2.Mount hydraulic pumpto tractor by sliding splined pump drive joint onto front PTO shaft with mounting brackets inside main frame and attaching with four 5/16 x 7/8 inch bolts.

3.Attach the front guard on the front of the sub-frame usingtwo each 1/2x 1 inch and 1/2 x 1 5/16 inch bolts, and four each 1/2 inch nuts and washers. Tighten bolts and nuts.

Torque: 76 ft-lb (103 Nm)

37