Honda Power Equipment FL5540K0 manual Cotter PIN

~ ~ ~~ ~

FRONT LOADER ASSEMBLY

7.Attach brace arms to masts with clevis pins and clip pin.

Tighten front guard bolts installed in step 5.

Torque: 76 ft-lb (103 Nm).

8.Bring the two hoses along the left side brace arm to the left mast. Route hoses on the left brace arm with metal loops. Ensure that the high pressure hose (smaller diameter) is positioned on top of the suction hose (large diameter).

Install the nylon tie strap to bind the two hoses together at front corner of hoodline.

9.Install valve handles to the hydraulic control valve mounted on the left mast. The "A" handle attachesto the spool used for loader operation and the "B" handle attachesto the spool for bucket operation.

COTTER PIN - PIN

21