- -
FL5540
COUNTERWEIGHT
INSTALLATION/REMOVAL
1.Remove the existing frame lower cover and replace with the new lower cover using existing mounting bolts and collar washers.
INSTALLATION INSTRUCTIONS
1 C(M#ECO)IUCISWFACESBEIWEENBUWMrPrJllL
i MOW ME BRAcILl DY INSWING WE Q) WLR RMCBlTOpouOl W I T . . 3. W H E N UNDBnDE MOUmNC KHTr 29
1.IIcHlEN SIDE LHWW IOU& 29
m
ME pAmI FRAME CAN BE DAMACED F ME lpAcrop
ISMOVEDWHLEMHL1COMRISOCFORWIJSAB3
NOT lWITWE0 Io ME mofm TopOK
NEW LOWER FRONT COVER
Note: A second label is included with this operator's manual. Install this label onto the original frame lower cover.
2.Remove the drawbar and replace it with the bottom bracket using the two
12 x 25mm hex hd capscrews with 7/16" washers and two 10 x 30mm hex hd capscrews with 3%" washers.
Torque front cover and rear bracket bolts as follows:
10mm Bolts 29
DRAWBARBOLTS
BOirOM. . BRACKET
13