Marantz SR5004, SR6004 manual Preference, Zone Setup

FUNCTIONS	NAMES AND
CONNECTIONS	BASIC

ENGLISH

SETUP

5 PREFERENCE

1. Select “Preference” from Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select the desired menu with the 3 or

4 cursor buttons and press the ENTER button.

• Zone A Setup :

• HDMI Lip Sync:

Video signals may take longer to process than audio signals depending on the connected video equipment.

When the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a, audio and video can be automatically synchronized using this function.

Use the 1 or 2 cursor buttons to switch between Enable and Disable.

Enable: Auto Lipsync Correction is used to

Preference

Zone A Setup

Zone B Setup

DC Trigger Setup

Optical

Standby Mode

Audio

HDMI Audio

HDMI Lip Sync

Return

: Up / Down :

:Rec

:Normal

:Main

:Enable

:Disable

Enter : Select Exit : Exit

5-1 ZONE SETUP

This unit has source selectors, sleep timers, zonespeaker output, and remote controller for the two other ZONEs in the ZONE system.

These features can be set from this menu.

1. Select “Preference” from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “Zone A Setup” or “Zone B Setup”

OPERATION	BASIC
CONNECTIONS	ADVANCED
SETUP
OPERATION	ADVANCED
TROUBLESHOOTING
OTHERS

“5-1 ZONE SETUP” (see page 36)

• Zone B Setup :

“5-1 ZONE SETUP” (see page 36)

• DC Trigger Setup :

“5-2 DC TRIGGER SETUP” (see page 37)

• Optical:

Select when using equipment with optical digital output.

Rec: Select when recording to a CD recorder or MD recorder. (See page 12)

Zone B: Select when using ZONE B. (See pages 21, 65)

• Standby Mode:

When this is set to “Economy”, you can reduce the power consumption when the unit is in the Standby mode. When “Economy” is selected, “RS-232C” is disabled when the unit is in the Standby mode.

• Audio:

In the Audio mode, Dolby Digital and DTS output is set to either “Main” or “Sub”. Select “Audio” with the 1 or 2 cursor buttons, then select Main ↔ Sub ↔ Main+Sub with the 1 or 2 cursor buttons.

• HDMI Audio:

This setting determines whether to play back audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector.

Enable: The audio input to the HDMI jacks can be played back by this unit.

In such case, audio signals are not output to the TV or projector.

Through: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc.

synchronize audio and video.

Disable: Deactivates this function.

Notes

•This function is not available when the unit is connected to equipment that does not support HDMI 1.3a or Auto Lipsync Correction. For details, check the userʼs manual of the connected equipment.

•If this function is unavailable, you can use the regular Lipsync function to synchronize audio and video. (See page 43)

After you complete this portion of the setup, move the cursor to “Return” with the 3 or 4 cursor buttons and press the ENTER button.

Zone A Setup
Audio Source		: BLU-RAY
Sleep Timer		: Off
Stereo / Mono.		: Stereo
Zone Pre Out		: Off
Volume Mode		: Variable
Level		: -90dB
Zone Speaker Out		: * * *
Volume Mode		: * * *
Level		: * * *
Return
: Up / Down	: Change	Enter :	Exit : Exit
Zone B Setup
Audio Source		: BLU-RAY (Dig.-)
Sleep Timer		: Off
Zone Digital Out		: Off
Return
: Up / Down	: Change	Enter :	Exit : Exit
					SR6004
		DC Trigger Setup
		TriggerSystem Error!!		: Disable
		BLU-RAY		: * * *
		DVD		: * * *
		VCR		: * * *
		DSS		: * * *
		TV		: * * *
		CD/CDR		: * * *
		7.1ch Input		: * * *
		M-XPort		: * * *
		Tuner		: * * *
		USB Audio		: * * *
		Return
		: Up / Down	: Change	Enter :	Exit : Exit
					SR5004
		DC Trigger Setup
		TriggerSystem Error!!		: Disable
		BLU-RAY		: * * *
		DVD		: * * *
		VCR		: * * *
		DSS		: * * *
		TV		: * * *
		CD/CDR		: * * *
		7.1ch Input		: * * *
		M-XPort		: * * *
		Tuner		: * * *
		Return
		: Up / Down	: Change	Enter :	Exit : Exit

with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the setting.

The following explanation shows how to operate ZONE A of the ZONE system.

Zone A Setup
Audio Source		: BLU-RAY
Sleep Timer		: Off
Stereo / Mono.		: Stereo
Zone Pre Out		: Off
Volume Mode		: Variable
Level		: -90dB
Zone Speaker Out		: * * *
Volume Mode		: * * *
Level		: * * *
Return
: Up / Down	: Change	Enter :	Exit : Exit

The following explanation shows how to operate ZONE B of the ZONE system.

Zone B Setup
Audio Source	: BLU-RAY(Dig.-)
Sleep Timer	: Off
Zone Digital Out	: Off
Return

: Up / Down : Change Enter : Exit : Exit

4. Select the desired item with the 3 or 4 cursor button.

Audio Source:

Select the audio source of the ZONE output with the 1 or 2 cursor buttons.

36