Marantz SR6004, SR5004 manual DC Trigger Setup

Sleep Timer:

The sleep mode is available when the ZONE is active, set the time with 1 or 2 cursor buttons. The sleep timer can be set to a maximum 120 minutes in 10 minute increments.

Stereo / Mono: (Zone A only)

This mode switches audio output to the ZONE system between Monaural and Stereo, using the 1 and 2 cursor buttons.

Zone Pre Out: (Zone A only)

Switch the zone pre out “On” or “Off” with the 1 or 2 cursor buttons.

Volume Mode: (Zone A only)

Select whether the zone pre out level is Variable or Fixed with the 1 or 2 cursor buttons.

Level (Volume Level): (Zone A only)

Adjust the zone pre out level with the 1 or 2 cursor buttons. The volume can be set between

-90 dB and 0 dB in 1 dB increments.

Zone Speaker Out: (Zone A only)

Switch the zone speaker out “On” or “Off” with the 1 or 2 cursor buttons.

Volume Mode: (Zone A only)

•Zone Speaker Out cannot be on the ZONE B.

•In ZONE B, input sources that have not been set cannot be used.

•There are no Stereo/Mono, Volume Mode, Level (Volume Level) or Zone Speaker Out settings for

ZONE B.

•If Optical Output is set to Rec (See page 36), Zone B functions cannot be used.

5-2 DC TRIGGER SETUP

This unit has a DC trigger control jack, which can be used to link with input functions for the main ZONE or ZONE A or ZONE B.

1. Select “Preference” from Main Menu with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “DC Trigger Setup” with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the selection.

SR6004

DC Trigger Setup
TriggerSystem Error!!		: Disable
BLU-RAY		: * * *
DVD		: * * *
VCR		: * * *
DSS		: * * *
TV		: * * *
CD/CDR		: * * *
7.1ch Input		: * * *
M-XPort		: * * *
Tuner		: * * *
USB Audio		: * * *
Return
: Up / Down	: Change	Enter :	Exit : Exit

ENGLISH

SETUP

5. Select desired input source with the 3 or 4 cursor buttons.

6. Set to “On” or “Off” with the 1 or 2 cursor buttons.

7. After you complete this portion of the setup, move the cursor to “Return” with the 3 or 4 cursor button and press the ENTER button.

Note

•When an input source that is on in the set ZONE is selected, voltage is output to the DC TRIG output terminal.

NAMES AND	FUNCTIONS
BASIC	CONNECTIONS
BASIC	OPERATION
ADVANCED	CONNECTIONS

Select whether the zone speaker out level is Variable or Fixed with the 1 or 2 cursor buttons.

Level (Volume Level): (Zone A only)

Adjust the zone speaker out level with the 1 or 2 cursor buttons. The volume can be set between -90 dB and 0 dB in 1 dB increments.

Zone Digital Out: (Zone B only)

Switch the zone digital out “On” or “Off” with the 1 or 2 cursor buttons.

Notes

DC Trigger Setup
TriggerSystem Error!!		: Disable
BLU-RAY		: * * *
DVD		: * * *
VCR		: * * *
DSS		: * * *
TV		: * * *
CD/CDR		: * * *
7.1ch Input		: * * *
M-XPort		: * * *
Tuner		: * * *
Return
: Up / Down	: Change	Enter :

SR5004

Exit : Exit

SETUP

ADVANCED OPERATION

•In ZONE A, it is impossible to use HDMI or digital input (optical and coaxial) sources.

•In ZONE B, it is possible to use digital input (optical and coaxial) sources.

•Zone Speaker Out setting can be changed when the Surround Back is set to “None” in the Speaker Size menu and “SPEAKER C” is in the OFF position on the rear panel. When this setting is unavailable, “***” is displayed.

•If “Volume” is set to “Fixed”, the ZONE output level cannot be adjusted from the ZONE A.

4. You can select “Main Zone”, “Zone A”, “Zone B”, “Remote” or “Disable” with the 1 or 2 cursor buttons.

Note

•Remote is available for the external control. The RC007SR/RC008SR cannot operate the function.

TROUBLESHOOTING

OTHERS

37