Marantz SR6005 manual RS-232C connector, DC OUT Trigger OUT jacks

Page 45

SVENSKA NEDERLANDS

RS-232C connector

When you connect an external control device, you can control this unit with the external control device. Perform the operation below beforehand.

External serial controller

Perform the operation below beforehand. q Turn on the power of this unit.

w Turn off the power of this unit from the external controller. e Check that the unit is in the standby mode.

ESPAÑOL

ITALIANO

FRANÇAIS

DEUTSCH

ENGLISH

DC OUT (TRIGGER OUT) jacks

When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit.

The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.

12 V/150 mA trigger-compatible device

in Set as Necessary

Set to change the conditions for linked operation via the DC OUT (TRIGGER OUT) jack. “Trigger Out” (vpage 67)

NOTE

If the permissible trigger input level for the connected device is larger than 12V/150 mA, or has shorted, the DC OUT (TRIGGER OUT) jack cannot be used.

In this case, turn off the power to the unit, and disconnect it.

Simple version

Basic version

Advanced version

Information

41

Page 44 Page 46
Image 45
Page 44 Page 46
Contents SR6005 Page Product Important Notice do not Modify this ProductFor Canadian customers Avertissements Advertencias Getting started ContentsAccessories FeaturesAbout this manual Speaker terminal for front height channel Other featuresVpage Set up speakers Audyssey Auto SetupPreparation Speaker Measurement Calculation Check Store DetectionConnecting the speaker cables SpeakersSpeaker terminals Impedance Audio cable sold separately Blu-ray Disc player and TVBlu-ray Disc player Hdmi cable Sold separatelySet up speakers Set up the subwoofer About setup microphone placementSet up the remote control unit About the main listening position *MWhen measuring has stopped When performing Audyssey Auto Setup over againSetting up the speakers again PreparationNn When turning Dynamic Volume off Nn When turning Dynamic Volume onFinish Calculation Check StoreRetrieving Audyssey Auto Setup settings Examples Error detailsPress Return When power is switched to standby Adjust the sound volumeSet the listening mode For speaker connections, see Basic versionConnections GFlow of video signals for Main ZonehImportant information Examples of screen displayConnecting an HDMI-compatible device NnSettings related to Hdmi connections Connecting to a device equipped with a DVI-D connectorHdmi Setup vpage Cables used for connectionsConnecting a Blu-ray Disc player / DVD player Connecting a TVConnecting a video cassette recorder Connecting a set-top box Satellite tuner/cable TVDigital cable Satellite tuner/Cable TV Video cassette recorderYou can enjoy music stored on an iPod or USB memory device Supported iPod modelsUSB Digital camcorderConnecting an antenna Connecting a CD playerConnecting a Sirius connector NnPositioning the antennaConnecting an HD Radio receiver Connecting a wireless receiver RX101NnAM loop antenna assembly NnUsing the AM loop antenna Suspending on a wallAudio cable Power amplifier Connecting a external power amplifierPlayback Basic operation Selecting the input sourceSet the front speakers to be used Playing a Blu-ray Disc player/DVD player Playing a CD playerPlaying a USB memory device NnUSB operation Playing files stored on USB memory devicesFunction Uio pDisplay mode Direct modePlaying an iPod NniPod operationNnUsing the HD Radio receiver Tuning in radio stationsListening to Sirius satellite radio NnAbout Sirius XM radioNnListening to preset channels NnPresetting radio channels Preset memoryNnAccessing Sirius satellite radio channels directly NnSearching categoriesListening to HD Radio stations NnPresetting radio stations Manual presetNnParental Lock NnSIRIUS operationNnDirect frequency tuning Default settingsNnCheck the HD Radio reception information NnTuner HD Radio reception operationListening mode Selecting a listening mode Surround modeMulti-channel playback NnSurround playback of 2-channel sourcesDisplaying the currently playing surround mode Input signal Surround mode DisplayGViews on the displayH Stereo playback NnDolby Virtual Speaker mode NnDolby Headphone modeDolby Virtual Speaker/Dolby Headphone playback Direct playbackAdvanced version When 7.1ch Front height speaker installed InstallChannel Front height speaker connection ConnectChannel Surround back speaker connection For speaker impedance and speaker cable connections, seeFront speakers to be used Channel connection Front A/B connectionNnFor connecting two subwoofers Channel connectionBi-Amp connection Set up Amp Assign Set up speakersSet up Channel Select Set upNnSetting Remote Control jacksConnections Advanced connection NnConnectionDC OUT Trigger OUT jacks RS-232C connectorConvenient functions Playback Advanced operationHdmi control function Set Hdmi Control vpage 64 to onAdjusting the volume of the speakers Sleep timer functionTo cancel the sleep timer NnAdjusting the volume of groups of speakers Fader functionVarious memory functions Panel lock functionPlayback in ZONE2 Separate room Connecting and setting the speakersZONE2 playback by speaker output ZONE2 playback by audio outputAdjusting the volume PlaybackTurning off the sound temporarily How to make detailed settings Menu mapItems that only need to be set Once Display when resetting Display when inputting charactersExamples of menu and front display Menu display Front display DescriptionInputting characters Normal screenKeyboard screen Menu operation Input SetupNnAbout the display of input sources Select a character to be input with uio p then press EnterPreset Skip Auto PresetItems that can be set with the Input Setup procedure Parental LockInput Assign Preset NameAntenna Aiming Examples of input assign menu screen displaysDVD VCR HdmiDVD VCR SAT RCAVCR AUX1 AUX1Playback Mode Input ModeRename Source LevelAudio Adjust Audio/Video AdjustItems that can be set with the Audio Adjust procedure NnSurround ParameterSetting items Setting details Height Gain Setting items Setting details MultEQNnTone Setting items Setting details Dynamic EQ Setting items Setting details Dynamic VolumeReference Level Offset NnAudio Delay NnManual EQHigh Default settings are underlined Picture AdjustDNR OFF / Low / Mid / HighItems that can be set with the Manual Setup procedure Manual SetupSetting items Setting details Bass Setting Setting items Setting details Speaker Config80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz Distance12.0dB +12.0dB 0.0dB Adjust the volume Setting items Setting details DistanceChannel Level 250HzAudio Setup Hdmi SetupHPF ZONE2 SetupUsing Source SEL Option SetupDirect and Return for at least 3 seconds GUINn When setting for zone Main Zone / ZONE2 Nn When setting for input sourceSetup Lock Zone RenameRemote control settings Other settingsNnDisabling the sensor function of the remote control unit InformationOperating the connected devices by remote control unit Operating AV equipmentPress the input source select button vpage Registering preset codes Registering preset codesCheck the registered preset code Switch the input source vpage Operate the component Default settings for preset codesOperating components NnCD player operationRemembering remote control codes from other devices Operating learn functionNnSet top box for satellite SAT operation NnDelete remote control codes for each input source Delete saved remote control codesNnDelete remote control codes for all input sources Input source is shown in the remote control displayOperating macro function Press the Volume +Recording macro operations Editing recorded macro operationsUsing macro operations Setting the back lightDeleting recorded macro operations NnDisabling the backlightInformation Part names and functions Q0Headphones jackFront panel GWith the door openH Q7 Q8 Q9 W0 W1 W2 W3 W4 W5 W6 Q2 Q3Q3Q2Q1 DisplayQ6 Q5 Q4 Q3 Q2 Q1Q0 Rear panelSee the page indicated in parentheses Q1FLASHER in jackRemote control unit W4SEARCHR3CHANNEL Inserting the batteries Operating range of the remote control unitTrademark information Other informationSymbols in the table SurroundSurround modes and surround parameters Surround This indicates the selectable surround mode NnTypes of input signals, and corresponding surround modesDirect Pure Direct Multi CH Stereo Neural Auto Relationship between video signals and monitor output Explanation of terms A2DPDTS Hdcp DTS-HDPower does not turn TroubleshootingGGeneralH GVideoHGsirius Satellite RadioH GhdmihChannel is not present. Select another channel Displayed GHD Radio receiverHResetting the microprocessor GiPodHGM-XPortH Nn Audio section SpecificationsNn HD Radio section Nn GeneralIndex VvR VvPVvS VvTPage Device select BD Preset CodeDevice select CD Unit mm Dimensions / Dimensions / Dimensions

SR6005 specifications

The Marantz SR6005 is a high-performance 7.1-channel AV receiver that caters to audiophiles and home theater enthusiasts alike. Renowned for its signature warm sound quality and robust build, the SR6005 exemplifies the brand’s commitment to delivering superior audio performance and advanced features.

At the heart of the SR6005 is its powerful amplification system, capable of delivering 100 watts per channel into 8 ohms. This ensures that your home theater experience is immersive and engaging, whether you're watching movies or listening to music. The receiver supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing an exceptional surround sound experience.

In terms of connectivity, the SR6005 comes equipped with multiple HDMI inputs, accommodating the latest 3D video formats and 4K pass-through capabilities. This makes it an ideal choice for future-proofing your entertainment system. Additionally, it features component video and composite video inputs for older equipment, ensuring compatibility with a diverse range of devices.

Marantz has incorporated its proprietary technologies into the SR6005 to optimize audio performance. The Audyssey MultEQ XT room correction system analyzes the acoustics of your room and adjusts the speaker settings accordingly, allowing for a tailored sound experience. This feature, combined with the receiver's high-quality DACs (Digital-to-Analog Converters), ensures pristine audio reproduction across the board.

The SR6005 is also equipped with a user-friendly interface and remote control, making it easy to navigate through various settings and audio configurations. The front panel offers a clean design with essential controls and input selections, while the on-screen display provides intuitive access to various features.

Another noteworthy aspect of the Marantz SR6005 is its multi-zone capabilities. With the ability to control different audio sources in multiple rooms, it becomes a versatile component for whole-house audio solutions. This feature, paired with network streaming capabilities, allows users to stream music from various online services directly to their systems.

In conclusion, the Marantz SR6005 stands out as a premium AV receiver, offering a blend of powerful performance, versatile connectivity, and advanced audio technologies. Whether you’re a casual listener or a dedicated home theater buff, the SR6005 provides a rich and rewarding sound experience that will elevate your entertainment setup.
Top Page Image Contents