SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Sleep timer function
The power automatically goes into standby once the set time has elapsed.
This is convenient for playing sources while going to sleep.
1 Press AMP to set the remote control unit to amplifier operation mode.
2 Press SLEEP and display the time you want to set.
The indicator on the display lights.
•The time switches as shown below each time SLEEP is pressed.
OFF 10 min 20 30 40 50
120 110 100 90 80 70 60
To cancel the sleep timer
Press SLEEP to set “OFF”.
The indicator on the display turns off.
•The sleep timer setting is canceled if this unit’s power is set to standby or turned off.
•When power to the main zone is turned off with the sleep timer, power in ZONE2 is also turned off.
Adjusting the volume of the speakers
You can adjust the channel level either according to the playback sources or to suit your taste, as described below.
nnAdjusting the volume of the different speakers
1 Press AMP to set the remote control unit to amplifier operation mode.
2 Press CH LVL.
CHANNEL LEVEL
Front L | 0.0dB |
|
Front R | 0.0dB |
|
Center | 0.0dB |
|
Subwoofer | 0.0dB |
|
Surround L | 0.0dB |
|
Surround R | 0.0dB |
|
S.Back L | 0.0dB |
|
S.Back R | 0.0dB |
|
Fader | Front | Rear |
Select |
|
|
3 Use ui to select the speaker.
The speaker that can be set switches each time one of the buttons is pressed.
4 Use o p to adjust the volume.
•In the case of a subwoofer, pressing o when it is at
•When a headphone jack is inserted, the headphone channel level can be adjusted.
•When the input mode setting is “7.1CH IN”, you can adjust the channel level while the 7.1CH INPUT connector is being used.
Convenient functions
nnAdjusting the volume of groups of speakers (Fader function)
This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / center speaker) or rear (surround speaker / surround back speaker).
1 Press AMP to set the remote control unit to amplifier operation mode.
2 Press CH LVL.
CHANNEL LEVEL
Front L | 0.0dB |
|
Front R | 0.0dB |
|
Center | 0.0dB |
|
Subwoofer | 0.0dB |
|
Surround L | 0.0dB |
|
Surround R | 0.0dB |
|
S.Back L | 0.0dB |
|
S.Back R | 0.0dB |
|
Fader | Front | Rear |
Select |
|
|
3 Press i to select “Fader”, then select the item to be adjusting using o p.
4 Use o p to adjust the volume of the speakers. (o : front, p: rear)
•The fader function does not affect the subwoofer.
•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of
Simple version
Basic version
Advanced version
Information
43