Marantz SR6005 manual Speaker terminal for front height channel, Other features

Page 7

SVENSKA

NEDERLANDS

ESPAÑOL

ITALIANO

FRANÇAIS

DEUTSCH

ENGLISH

Features

Speaker terminal for front height channel

The unit is equipped with dedicated front height channel speaker terminals on the rear panel. You can enjoy 7.1-channel playback using the front height channel and 7.1-channel playback using the surround back channel, without having to reconnect the speakers.

Other features

•Dolby Virtual Speaker (vpage 33)

•Dolby Headphone (vpage 33)

•DTS Neural Surround (vpage 32)

Cautions on handling

•Before turning the power switch on

Check once again that all connections are correct and that there are no problems with the connection cables.

•Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the power cord from the power outlet.

•About condensation

If there is a major difference in temperature between the inside of the unit and the surroundings, condensation (dew) may form on the operating parts inside the unit, causing the unit not to operate properly.

If this happens, let the unit sit for an hour or two with the power turned off and wait until there is little difference in temperature before using the unit.

•Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from this unit when it is in use.

•Moving the unit

Turn off the power and unplug the power cord from the power outlet. Next, disconnect the connection cables to other system units before moving the unit.

•About Care

•Wipe the cabinet and control panel clean with a soft cloth.

•Follow the instructions when using a chemical cleaner.

•Benzene, paint thinner or other organic solvents as well as insecticide may cause material changes and discoloration if brought into contact with the unit, and should therefore not be used.

Simple version

Basic version

Advanced version

Information

3

Image 7

Contents SR6005 Page Important Notice do not Modify this Product ProductFor Canadian customers Avertissements Advertencias Getting started ContentsFeatures AccessoriesAbout this manual Speaker terminal for front height channel Other featuresDetection Set up speakers Audyssey Auto SetupVpage Preparation Speaker Measurement Calculation Check StoreSpeakers Connecting the speaker cablesSpeaker terminals Impedance Hdmi cable Sold separately Blu-ray Disc player and TVAudio cable sold separately Blu-ray Disc playerSet up speakers About the main listening position *M About setup microphone placementSet up the subwoofer Set up the remote control unitPreparation When performing Audyssey Auto Setup over againWhen measuring has stopped Setting up the speakers againCalculation Check Store Nn When turning Dynamic Volume onNn When turning Dynamic Volume off FinishExamples Error details Retrieving Audyssey Auto Setup settingsPress Return Adjust the sound volume When power is switched to standbySet the listening mode For speaker connections, see Basic versionExamples of screen display GFlow of video signals for Main ZonehConnections Important informationConnecting an HDMI-compatible device Cables used for connections Connecting to a device equipped with a DVI-D connectorNnSettings related to Hdmi connections Hdmi Setup vpageConnecting a Blu-ray Disc player / DVD player Connecting a TVVideo cassette recorder Connecting a set-top box Satellite tuner/cable TVConnecting a video cassette recorder Digital cable Satellite tuner/Cable TVDigital camcorder Supported iPod modelsYou can enjoy music stored on an iPod or USB memory device USBNnPositioning the antenna Connecting a CD playerConnecting an antenna Connecting a Sirius connectorNnUsing the AM loop antenna Suspending on a wall Connecting a wireless receiver RX101Connecting an HD Radio receiver NnAM loop antenna assemblyAudio cable Power amplifier Connecting a external power amplifierSelecting the input source Playback Basic operationSet the front speakers to be used Playing a CD player Playing a Blu-ray Disc player/DVD playerPlaying a USB memory device Uio p Playing files stored on USB memory devicesNnUSB operation FunctionNniPod operation Direct modeDisplay mode Playing an iPodNnAbout Sirius XM radio Tuning in radio stationsNnUsing the HD Radio receiver Listening to Sirius satellite radioNnSearching categories NnPresetting radio channels Preset memoryNnListening to preset channels NnAccessing Sirius satellite radio channels directlyNnSIRIUS operation NnPresetting radio stations Manual presetListening to HD Radio stations NnParental LockNnTuner HD Radio reception operation Default settingsNnDirect frequency tuning NnCheck the HD Radio reception informationNnSurround playback of 2-channel sources Selecting a listening mode Surround modeListening mode Multi-channel playbackInput signal Surround mode Display Displaying the currently playing surround modeGViews on the displayH Direct playback NnDolby Virtual Speaker mode NnDolby Headphone modeStereo playback Dolby Virtual Speaker/Dolby Headphone playbackAdvanced version When 7.1ch Front height speaker installed InstallFor speaker impedance and speaker cable connections, see ConnectChannel Front height speaker connection Channel Surround back speaker connectionFront speakers to be used Channel connection Front A/B connectionChannel connection NnFor connecting two subwoofersBi-Amp connection Set up Set up speakersSet up Amp Assign Set up Channel SelectNnConnection Remote Control jacksNnSetting Connections Advanced connectionDC OUT Trigger OUT jacks RS-232C connectorSet Hdmi Control vpage 64 to on Playback Advanced operationConvenient functions Hdmi control functionNnAdjusting the volume of groups of speakers Fader function Sleep timer functionAdjusting the volume of the speakers To cancel the sleep timerVarious memory functions Panel lock functionZONE2 playback by audio output Connecting and setting the speakersPlayback in ZONE2 Separate room ZONE2 playback by speaker outputPlayback Adjusting the volumeTurning off the sound temporarily Menu map How to make detailed settingsItems that only need to be set Once Menu display Front display Description Display when inputting charactersDisplay when resetting Examples of menu and front displayNormal screen Inputting charactersKeyboard screen Select a character to be input with uio p then press Enter Input SetupMenu operation NnAbout the display of input sourcesParental Lock Auto PresetPreset Skip Items that can be set with the Input Setup procedureExamples of input assign menu screen displays Preset NameInput Assign Antenna AimingRCA HdmiDVD VCR DVD VCR SATVCR AUX1 AUX1Source Level Input ModePlayback Mode RenameNnSurround Parameter Audio/Video AdjustAudio Adjust Items that can be set with the Audio Adjust procedureSetting items Setting details MultEQ Setting items Setting details Height GainNnTone Setting items Setting details Dynamic Volume Setting items Setting details Dynamic EQReference Level Offset NnManual EQ NnAudio DelayHigh OFF / Low / Mid / High Picture AdjustDefault settings are underlined DNRItems that can be set with the Manual Setup procedure Manual SetupDistance Setting items Setting details Speaker ConfigSetting items Setting details Bass Setting 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz250Hz Setting items Setting details Distance12.0dB +12.0dB 0.0dB Adjust the volume Channel LevelAudio Setup Hdmi SetupHPF ZONE2 SetupGUI Option SetupUsing Source SEL Direct and Return for at least 3 secondsZone Rename Nn When setting for input sourceNn When setting for zone Main Zone / ZONE2 Setup LockInformation Other settingsRemote control settings NnDisabling the sensor function of the remote control unitOperating AV equipment Operating the connected devices by remote control unitPress the input source select button vpage Registering preset codes Registering preset codesCheck the registered preset code NnCD player operation Default settings for preset codesSwitch the input source vpage Operate the component Operating componentsOperating learn function Remembering remote control codes from other devicesNnSet top box for satellite SAT operation Input source is shown in the remote control display Delete saved remote control codesNnDelete remote control codes for each input source NnDelete remote control codes for all input sourcesEditing recorded macro operations Press the Volume +Operating macro function Recording macro operationsNnDisabling the backlight Setting the back lightUsing macro operations Deleting recorded macro operationsInformation GWith the door openH Q7 Q8 Q9 W0 W1 W2 W3 W4 W5 W6 Q2 Q3 Q0Headphones jackPart names and functions Front panelQ3Q2Q1 DisplayQ1FLASHER in jack Rear panelQ6 Q5 Q4 Q3 Q2 Q1Q0 See the page indicated in parenthesesW4SEARCH Remote control unitR3CHANNEL Inserting the batteries Operating range of the remote control unitTrademark information Other informationSurround Symbols in the tableSurround modes and surround parameters Surround This indicates the selectable surround mode NnTypes of input signals, and corresponding surround modesDirect Pure Direct Multi CH Stereo Neural Auto Relationship between video signals and monitor output A2DP Explanation of termsDTS Hdcp DTS-HDGVideoH TroubleshootingPower does not turn GGeneralHGHD Radio receiverH GhdmihGsirius Satellite RadioH Channel is not present. Select another channel DisplayedGiPodH Resetting the microprocessorGM-XPortH Nn General SpecificationsNn Audio section Nn HD Radio sectionIndex VvT VvPVvR VvSPage Device select BD Preset CodeDevice select CD Unit mm Dimensions / Dimensions / Dimensions