Echo ES-250 specifications Operation, Fuel Requirements, Handling Fuel

Page 15

ES-250

OPERATION

 

 

OPERATION

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

Blower housing may contain shredder blades and other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving. Wear gloves to protect hands from sharp edges and hot surfaces.

Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements.

Fuel

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be used. Echo brand premium Power Blend X TM Universal 2-Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD certified oil, such as Echo premium Power Blend X TM, will void the two-stroke engine warranty.

Echo premium Power Blend X TM Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past regardless of ratio specified in those manuals.

Handling Fuel

Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.

Use an approved fuel container.

DO NOT smoke near fuel.

DO NOT allow flames or sparks near fuel.

X7501182803

15

© 03/2013 ECHO Inc.

Image 15
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionSafety Manual Safety Symbols and Important InformationInternational Symbols Personal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment Emission Control Exhaust & Evaporative EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Description Description Contents Assembly Install Blower PipesBlower Application Vacuum/Shredding Application Install Vacuum TubeInstall Bag Remove Blower PipesX7501182803 Handling Fuel OperationFuel Fuel RequirementsAfter use Starting Cold EngineThrottle Trigger Starting Warm EngineOperating Blower Stopping EngineShred ‘ N’ VAC Operation Read the Safety Section carefullyProblem Cause Remedy Shred ‘ N’ VAC TroubleshootingMaintenance Maintenance IntervalsSkill Levels Fuel Filter Air FilterCleaning Grill Spark PlugCooling System Spark Arrestor Screen Cleaning Cylinder FinsExhaust Port Cleaning Exhaust SystemCarburetor Adjustment Engine Break-InHigh Altitude Operation Debris Bag Shredder BladeEngine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements ES-250 ES-250 ES-250 ES-250