DESCRIPTION | |
|
|
1.SAFETY DECAL - Lists important safety precautions.
2.STOP SWITCH - "SLIDE SWITCH" mounted on top of handle. Push forward to start and run. Slide back to stop.
3.SPARK PLUG - Provides spark to ignite fuel mixture.
4.FUEL TANK - Contains fuel and fuel filter.
5.FUEL TANK CAP - Covers and seals fuel tank.
6.CHOKE - The choke control lever is located on the front of the air cleaner case. Move choke lever to "COLD START" ( 
) to close the choke for Cold Starting. Move choke lever to "RUN" ( 
) position to open choke.
7.RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
8.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times.
9.SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST
10.BLOWER PIPES - Exclusive positive locking system.
11.SOUND LABEL - Lists important safety precautions.
12.SAFETY DECAL - Lists important safety precautions.
13.THROTTLE POSITION LEVER - Pull back to increase engine speed. Friction washers maintain throttle lever setting.
14.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradually for best operating technique.
15.AIR CLEANER - Contains replaceable air filter element.
10 | X7501182803 |
© 03/2013 ECHO Inc.