Echo ES-250 specifications Equipment

Page 7

ES-250

SAFETY

 

 

 

 

 

 

 

 

 

Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

Read the Manual

Provide all users of this equipment with the Operator’s Manual for instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

• Take wind conditions into account: avoid open doors and windows.

• Do not point blower at people or animals.

Review area to be cleared. Look for potential hazards such as stones or metal objects.

Keep a Firm Grip

• Hold the handle in one hand, with thumb and fingers encircling the handle.

Keep a Solid Stance

Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Avoid Hot Surfaces

Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.

Equipment

Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual.

Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

Do not use blower if any part is missing or damaged.

Have repairs done only by an authorized ECHO Service dealer.

X7501182803

7

© 03/2013 ECHO Inc.

Image 7
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionManual Safety Symbols and Important Information SafetyInternational Symbols Personal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Install Blower Pipes AssemblyBlower Application Vacuum/Shredding Application Install Vacuum TubeInstall Bag Remove Blower PipesX7501182803 Handling Fuel OperationFuel Fuel RequirementsAfter use Starting Cold EngineThrottle Trigger Starting Warm EngineOperating Blower Stopping EngineShred ‘ N’ VAC Operation Read the Safety Section carefullyProblem Cause Remedy Shred ‘ N’ VAC TroubleshootingMaintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterSpark Plug Cleaning GrillCooling System Spark Arrestor Screen Cleaning Cylinder FinsExhaust Port Cleaning Exhaust SystemEngine Break-In Carburetor AdjustmentHigh Altitude Operation Debris Bag Shredder BladeEngine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements ES-250 ES-250 ES-250 ES-250