Echo CS-330T, CS-360T instruction manual Cutting Instructions, General

Page 14

Cutting Instructions

GENERAL

Kickback

WARNING

Read the ECHO “CHAIN SAW SAFETY MANUAL” included with your chain saw for additional cutting and safety instruc- tions. Failure to obey all instructions may result in serious or fatal injuries.

In all circumstances the operation of the chain saw is a one-man job. It is difficult at times to take care for your own safety, so don’t assume the responsibility for a helper as well. After you have learned the basic techniques of us- ing the saw, your best aid will be your own good common sense...

The accepted way to hold the saw is to stand to the left of the saw with your left hand on the front handlebar and your right hand on the rear handle so you can operate the throttle trigger with your right index finger.

Before attempting to fell a tree, cut some small logs or limbs. Become thoroughly familiar with the controls and the re- sponses of the saw.

Start the engine, see that it is running properly. Squeeze the trigger to open the throttle wide open and start the cut. If the chain is properly sharpened, the cutting should be relatively effortless. It is not necessary to press down hard to make the saw cut. Pushing the saw too hard will slow the engine and cutting will actually be more difficult.

NOTE

Some material may adversely affect the housings of your ECHO chain saw.

(Example: Palm Tree Acid, fertilizer, etc.) To avoid housing deterioration, carefully remove all packed saw dust around clutch and guide bar area and wash with water. Coat metal parts with light oil.

WARNING

Do not let the tip of the bar touch anything while the engine is running. At cutting speed the chain is moving at a high rate of speed. Should the tip contact a limb or log while the chain is moving, the tip will be pushed upward with considerable force. This is known as kickback. Avoid it!

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents X7503242504 04/12Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationPage Symbols and Signs ContentsSymbol Form Emission Control exhaust & evaporative DescriptionNomenclature of Parts CS-330T, CS-360TKick guard to bar instructions Guide bar and saw chain-install/ re- movePreparation for Use Adjustment, chain tension Fuel Mix Chart 501 Fuel and Lubricant Fuel statementAfter use OperationChain lubricant Starting cold engine Stopping Starting warm engineRunning Cutting Instructions GeneralFelling a Tree Kickback Skill levels Maintenance and CareMaintenance intervals Oil strainer Air filterAutomatic oiler Fuel strainerSprocket Cooling system cleaningGuide bars and oil holes Spark plugStarter Side Exhaust Port CleaningMuffler spark arrestor LevelPage High Altitude Operation Carburetor adjustmentEngine Break-In Lo hiFollowing combinations may be used on CS-330T and CS-360T High Altitude AdjustmentChain and Guide Bar Combinations Setting the saw chain Chain type and sprocket pitchTroubleshooting Engine Problem Troubleshooting ChartStorage After USE Correct Use of Chain BrakeInstallation Technical Data Model CS-330T CS-360TWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories 99922201032 11/18/201199922201033 Additional or replacement manuals ServiceWarranty registration Servicing Information parts/serial number

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.
Top Page Image Contents