Echo CS-360T, CS-330T instruction manual

Page 21

5.Remove muffler nuts (B), washer sets (C), eyeplate (D), muffler (E), and muffler gasket (F). Check parts for wear or damage, and replace if necessary.

B

F

E

D

C

6.Use a wood or plastic scraping tool to clean deposits from cylinder exhaust ports (G).

IMPORTANT

If muffler mounting studs loosened during muffler nut removal, tighten studs using two nuts (H) tightened together on end of stud. Turn outer nut clockwise, and tighten stud to 70 kgf • cm (7 N-m, 60 in • lbf). Do not exceed specifications, otherwise stud damage may occur. To remove nuts, hold inner nut, and turn outer nut counter clockwise to remove, then turn inner nut counter clockwise to re- move.

7.Install muffler gasket (F), muffler (E), eyeplate (D), washer sets (C), and muffler nuts (B). Tighten nuts to 70 kgf • cm (7 N-m, 60 in • lbf), but do not exceed specifications, otherwise damage to studs may occur.

IMPORTANT

Washer sets must be installed with serrated surfaces facing apart, as shown in illustration.

8.Connect spark plug lead and replace air filter cover.

9.Start engine, and allow unit to warm up at idle for several minutes.

10. Stop engine, and re-tighten mounting nuts to to 70 kgf • cm (7 N-m, 60 in • lbf), but do not exceed specifications, otherwise damage to studs may occur.

11. Install muffler cover and tighten screws.

12. Install guide bar and chain, clutch cover, and guide bar nuts, tight- ening nuts until finger tight. Adjust chain tension as instructed in “Adjustment, Chain Tension” section of instruction manual.

13. Start engine and check for exhaust leaks between muffler and cyl- inder head. Stop engine if leak is found and correct problem before operating chain saw.

G

H

F

E

D

B C

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 04/12 X7503242504Rules for Safe Operation Kickback Safety Precautions for Chain Saw UsersPage Contents Symbols and SignsSymbol Form Description Emission Control exhaust & evaporativeCS-330T, CS-360T Nomenclature of PartsGuide bar and saw chain-install/ re- move Preparation for UseKick guard to bar instructions Adjustment, chain tension Fuel and Lubricant Fuel statement Fuel Mix Chart 501Operation Chain lubricantAfter use Starting cold engine Starting warm engine RunningStopping General Cutting InstructionsFelling a Tree Kickback Maintenance and Care Maintenance intervalsSkill levels Automatic oiler Air filterOil strainer Fuel strainerGuide bars and oil holes Cooling system cleaningSprocket Spark plugMuffler spark arrestor Exhaust Port CleaningStarter Side LevelPage Engine Break-In Carburetor adjustmentHigh Altitude Operation Lo hiHigh Altitude Adjustment Chain and Guide Bar CombinationsFollowing combinations may be used on CS-330T and CS-360T Chain type and sprocket pitch Setting the saw chainEngine Problem Troubleshooting Chart TroubleshootingCorrect Use of Chain Brake Storage After USEInstallation Model CS-330T CS-360T Technical DataExceptions Warranty Statements99922201032 11/18/2011 Purchased Repair PARTS, Short Blocks and Accessories99922201033 Warranty registration ServiceAdditional or replacement manuals Servicing Information parts/serial number

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.
Top Page Image Contents