Echo CS-330T, CS-360T instruction manual Preparation for Use, Kick guard to bar instructions

Page 8

Preparation for Use

G

K J H

M

L

N

kick guard® to bar instructions

For saws with Kick Guard® P/N 2894901 and symmetri- cal or asymmetrical low-kick type guide bars.

1.Install bolt (A) in rear hole (B) of Kick Guard® and through front hole (C) in guide bar.

2.IMPORTANT: Dimple in Kick Guard® (D) must engage recess in guide bar (E).

3.Tighten nut (F) and bolt (A) until snug. Make certain Kick Guard® is flush against guide bar.

guide bar and saw chain-install/ re- move

WARNING

Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result.

1.Move chain brake lever (G) fully rearward to unlock chain brake.

IMPORTANT

Always loosen guide bar nuts before turning chain tension adjuster, otherwise clutch cover and tensioner will be damaged.

2.Remove two guide bar nuts (H). Turn tension adjustment screw (J) counterclockwise 2 to 3 turns if bar and chain are installed.

3.Push clutch cover (K) forward, pull rear of cover out slightly, then remove.

4.Remove guide bar and saw chain if necessary.

NOTE: See “MAINTENANCE AND CARE” instructions for guide bar, sprocket, and saw chain maintenance.

5.Mount guide bar (L) on studs, and slide toward sprocket to make saw chain installation easier. Install saw chain (M) over clutch and place around sprocket and guide bar as shown, with cutters on top of guide bar facing forward.

6.Align holes of clutch cover (K) with guide bar studs, and tensioner pin (N) with lower guide bar adjuster hole. Install cover, then press and hold rear of cover to fully seat. Tighten guide bar nuts finger tight.

8

Image 8
Contents X7503242504 04/12Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationPage Symbols and Signs ContentsSymbol Form Emission Control exhaust & evaporative DescriptionNomenclature of Parts CS-330T, CS-360TKick guard to bar instructions Guide bar and saw chain-install/ re- movePreparation for Use Adjustment, chain tension Fuel Mix Chart 501 Fuel and Lubricant Fuel statementAfter use OperationChain lubricant Starting cold engine Stopping Starting warm engineRunning Cutting Instructions GeneralFelling a Tree Kickback Skill levels Maintenance and CareMaintenance intervals Air filter Automatic oilerOil strainer Fuel strainerCooling system cleaning Guide bars and oil holesSprocket Spark plugExhaust Port Cleaning Muffler spark arrestorStarter Side LevelPage Carburetor adjustment Engine Break-InHigh Altitude Operation Lo hiFollowing combinations may be used on CS-330T and CS-360T High Altitude AdjustmentChain and Guide Bar Combinations Setting the saw chain Chain type and sprocket pitchTroubleshooting Engine Problem Troubleshooting ChartStorage After USE Correct Use of Chain BrakeInstallation Technical Data Model CS-330T CS-360TWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories 99922201032 11/18/201199922201033 Service Warranty registrationAdditional or replacement manuals Servicing Information parts/serial number

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.