Echo CS-330T, CS-360T instruction manual Setting the saw chain, Chain type and sprocket pitch

Page 24

setting the saw chain

For setting saw chains, round file (4 mm ø: 5/32”) and flat file are used.

•To keep correct position and correct angle, use the file holder.

-Round file and flat file are available from your Echo Dealer.

•File cutters as below.

To sharpen other type chain, follow chain manufacturer’s instructions

30°

Keep this angle

PUSH FILE AS SHOWN

Type : 91VG

90°

HOLD FILE HOLDER

LEVEL

1/5

Depth

 

gauge

ONE FIFTH OF FILE DIAMETER REMAINS ABOVE CUTTER EDGE

•Place the depth gauge tool firmly on guide bar so that depth gauge protrudes. Then file top of depth gauge with flat file until flat with top of the gauge tool.

-Be sure to round off the front edge of the depth gauge.

Depth gauge

 

 

tool

 

Round

 

Remove

 

off the

 

until flat

 

edge

 

with tool

 

 

•Properly filed cutters are shown below.

(Top plate angle)

(Top plate cutting angle)

(Depth gauge)

0.64 mm (0.025 in.)

55°

Parallel

30°

•When setting of the chain is finished, soak it in oil and wash away filings completely before using.

•When chain has been filed on the bar, supply sufficient oil to it, rotate the chain slowly to wash away the filings before using again.

•If the chain saw is operated with filings clogged in the groove, the saw chain and the guide bar will be damaged prematurely

•If the saw chain becomes soiled with resin, for instance, clean it with kerosene and soak it in oil.

chain type and sprocket pitch

Saw chain should be used with corresponding pitched sprocket. To identify chain type and pitch of sprocket, check as follows.

•Chain type number (A) is stamped on drive link.

•Sprocket pitch (B) is stamped on clutch drum.

 

 

(SPROCKET)

(DRIVE LINK)

3/8A

 

 

 

 

Sprocket

Number indi-

 

Pitch

91

 

cates Chain

 

type

 

 

A

 

B

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents X7503242504 04/12Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationPage Symbols and Signs ContentsSymbol Form Emission Control exhaust & evaporative DescriptionNomenclature of Parts CS-330T, CS-360TGuide bar and saw chain-install/ re- move Preparation for UseKick guard to bar instructions Adjustment, chain tension Fuel Mix Chart 501 Fuel and Lubricant Fuel statementOperation Chain lubricantAfter use Starting cold engine Starting warm engine RunningStopping Cutting Instructions GeneralFelling a Tree Kickback Maintenance and Care Maintenance intervalsSkill levels Air filter Automatic oilerOil strainer Fuel strainerCooling system cleaning Guide bars and oil holesSprocket Spark plugExhaust Port Cleaning Muffler spark arrestorStarter Side LevelPage Carburetor adjustment Engine Break-InHigh Altitude Operation Lo hiHigh Altitude Adjustment Chain and Guide Bar CombinationsFollowing combinations may be used on CS-330T and CS-360T Setting the saw chain Chain type and sprocket pitchTroubleshooting Engine Problem Troubleshooting ChartStorage After USE Correct Use of Chain BrakeInstallation Technical Data Model CS-330T CS-360TWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories 99922201032 11/18/201199922201033 Service Warranty registrationAdditional or replacement manuals Servicing Information parts/serial number

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.
Top Page Image Contents