Echo CS-330T, CS-360T instruction manual Storage After USE, Correct Use of Chain Brake

Page 26

STORAGE AFTER USE

Inspect and adjust every part of the chain saw.

-Completely clean every part and repair if necessary.

-Apply thin coating of oil on metal parts to prevent rust.

Remove chain and guide bar.

Drain fuel tank completely. Press purge bulb 6 - 7 times to remove remaining fuel from carburetor then drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.

Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.

Store in a dry area, free from dust.

WARNING

Do not store in an enclosure where fuel fumes may accumlate or reach an open flame or spark.

CAUTION

Do not lend or rent your chain saw without the Instruction manual and Safety manual.

NOTE

For future reference, you should keep this Instruction manual and the Safety manual.

If this Instruction manual or the Safety manual has become illegible or is lost, please contact your ECHO dealer, or go to www.ech0-usa.com.

Correct Use of Chain Brake

The installation of a chain brake may be mandatory by law or as stipulated by insurance regulations in your area of operation. You should inquire through local government offices, your employer or your local dealer to ensure that your chain saw conforms to the required safety standard. Echo chain brakes have been designed and tested to comply with international safety standards as follows.

USA:

ANSI Standard B175.1-2000 Safety Requirement for chain saws

Canada:

CSA Standard Z 62.1 CHAIN SAWS

WARNING

ANSI Standard B175.1-2000 stipulates that the brake shall stop the chain in 0.15 seconds maximum (.12 sec avg) at full throttle. It is the responsibility of the Owner/Operator to ensure that the brake is serviced, adjusted and tested strictly in accordance with the instructions as detailed herein in order to ensure that the brake perfor- mance is maintained in compliance with the Standard B175.1-2000.

Kickback Motion:

Function:

When the bar nose hits another tree, etc.

When the lever is pushed forward, chain brake instantly works to stop the chain.

26

Image 26
Contents X7503242504 04/12Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationPage Symbols and Signs ContentsSymbol Form Emission Control exhaust & evaporative DescriptionNomenclature of Parts CS-330T, CS-360TKick guard to bar instructions Guide bar and saw chain-install/ re- movePreparation for Use Adjustment, chain tension Fuel Mix Chart 501 Fuel and Lubricant Fuel statementAfter use OperationChain lubricant Starting cold engine Stopping Starting warm engineRunning Cutting Instructions GeneralFelling a Tree Kickback Skill levels Maintenance and CareMaintenance intervals Oil strainer Air filterAutomatic oiler Fuel strainerSprocket Cooling system cleaningGuide bars and oil holes Spark plugStarter Side Exhaust Port CleaningMuffler spark arrestor LevelPage High Altitude Operation Carburetor adjustmentEngine Break-In Lo hiFollowing combinations may be used on CS-330T and CS-360T High Altitude AdjustmentChain and Guide Bar Combinations Setting the saw chain Chain type and sprocket pitchTroubleshooting Engine Problem Troubleshooting ChartStorage After USE Correct Use of Chain BrakeInstallation Technical Data Model CS-330T CS-360TWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories 99922201032 11/18/201199922201033 Additional or replacement manuals ServiceWarranty registration Servicing Information parts/serial number

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.