Echo CS-330T, CS-360T instruction manual Air filter, Automatic oiler, Oil strainer, Fuel strainer

Page 18

air filter

1.Close choke (Cold Start Position []). This prevents dirt from entering the carburetor throat when the air filter is removed.

Brush accumulated dirt from air cleaner area.

2.Remove air filter cover. Brush dirt from inside cover.

3.Remove air filter and lightly brush debris from filter. Replace filter if it is damaged, fuel soaked, very dirty, or deformed.

4.Install air filter cover.

automatic oiler

• The discharge volume of the automatic oiler is adjusted to 6 to 7 cc/min (@ 7000 rpm) prior to shipment from the factory.

• Always check oil discharge when in use.

• Turn adjusting screw (D) counter-clockwise to increase oil volume, clockwise to decrease oil volume.

oil strainer

•Check periodically.

1.Do not allow dust to enter oil tank.

2.Clogged oil strainer will affect the normal lubricating system

3.Using a wire bent into the shape of a hook, pull strainer out through oil port and inspect strainer.

4.If the strainer is dirty, clean with suitable cleaning fluid.

5.If the inside of the oil tank is dirty, rinse with suitable cleaning fluid.

6.Install strainer into lower front of oil tank to ensure proper chain lubrication.

fuel strainer

1.Do not allow dust to enter fuel tank.

2.Clogged strainer will cause difficulty in starting engine or ab- normalities in engine performance.

3.Using a wire bent into the shape of a hook, pull strainer out through gas port, and inspect strainer.

4.If the strainer is dirty, clean with suitable cleaning fluid.

5.If the inside of the tank is dirty, rinse with suitable cleaning fluid.

NOTE: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel sup- ply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents X7503242504 04/12Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationPage Symbols and Signs ContentsSymbol Form Emission Control exhaust & evaporative DescriptionNomenclature of Parts CS-330T, CS-360TGuide bar and saw chain-install/ re- move Preparation for UseKick guard to bar instructions Adjustment, chain tension Fuel Mix Chart 501 Fuel and Lubricant Fuel statementOperation Chain lubricantAfter use Starting cold engine Starting warm engine RunningStopping Cutting Instructions GeneralFelling a Tree Kickback Maintenance and Care Maintenance intervalsSkill levels Oil strainer Air filterAutomatic oiler Fuel strainerSprocket Cooling system cleaningGuide bars and oil holes Spark plugStarter Side Exhaust Port CleaningMuffler spark arrestor LevelPage High Altitude Operation Carburetor adjustmentEngine Break-In Lo hiHigh Altitude Adjustment Chain and Guide Bar CombinationsFollowing combinations may be used on CS-330T and CS-360T Setting the saw chain Chain type and sprocket pitchTroubleshooting Engine Problem Troubleshooting ChartStorage After USE Correct Use of Chain BrakeInstallation Technical Data Model CS-330T CS-360TWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories 99922201032 11/18/201199922201033 Additional or replacement manuals ServiceWarranty registration Servicing Information parts/serial number

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.
Top Page Image Contents