Echo CS-360T, CS-330T instruction manual Chain and Guide Bar Combinations, High Altitude Adjustment

Page 23

High Altitude Adjustment

1.Start engine and run for several minutes to reach operating temperature.

2.Stop engine.

3.Start engine and turn the HI speed needle (A) lean (CW) until the engine runs between 13,500 and 14,500 RPM. Then turn the LO speed needle lean (B) (CW) until the engine does not hesitate when accelerated.

DO NOT REMOVE LIMITER CAPS!

4.Idle Speed Adjustment.

• Turn “idle” speed adjustment screw (C) CW until the saw chain begins to move, then turn the screw CCW until saw chain stops moving. Turn screw CCW an additional 1/4 turn.

5.Accelerate to full throttle for 2-3 seconds to clear excess fuel from engine then return to idle. Accelerate to full throttle to check for smooth transition from idle to full throttle. If engine stops or stalls after full warm up return the unit to your autho- rized ECHO dealer for adjustment.

C

A B

 

 

Chain and Guide Bar Combinations

 

 

 

The following combinations may be used on CS-330T and CS-360T.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GUÍA DE LA

 

 

 

 

 

 

LARGO

 

BARRA

CADENA DE SIERRA CONTRAGOLPE BAJO

 

 

CONTRAGOLPE

MODELO

DE

 

 

 

 

 

 

 

BAJO

 

 

 

 

 

 

BARRA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N/P BARRA

N/P CADENA

DISTANCIA

TYPO

ESLABONES

GA

 

 

 

 

 

 

 

 

 

CS-330T

12 pulg

 

12A0ED3745

91VG-45

45

 

 

 

14 pulg

 

14A0ED3752

91VG-52

52

91VG

3/8"

0.050

CS-360T

 

16 pulg

 

16A0ED3757

91VG-57

57

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Reduced nose radius symmetrical bars (OREGON name — Double Guard)

WARNING

Use of replacement saw chain and/or guide bar other than that specified, or operation without the “tip guard” in place, may cause severe kickback resulting in serious injury.

Only use saw chain designated as, “LOW-KICKBACK,” that meets the ANSI B175.1-2000 Standard when tested on the representative sample of chain saws below 3.8 C.I.P. specified, and the Echo guide bar specified.

IMPORTANT

Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.

IMPORTANT

If your kick guard is damaged or lost, contact your Echo dealer for a replacement. For the name of the Echo dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at www.echo-usa.com.

Refer to your Chain Saw Safety Manual for kick guard application information.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 04/12 X7503242504Rules for Safe Operation Kickback Safety Precautions for Chain Saw UsersPage Contents Symbols and SignsSymbol Form Description Emission Control exhaust & evaporativeCS-330T, CS-360T Nomenclature of PartsKick guard to bar instructions Guide bar and saw chain-install/ re- movePreparation for Use Adjustment, chain tension Fuel and Lubricant Fuel statement Fuel Mix Chart 501After use OperationChain lubricant Starting cold engine Stopping Starting warm engineRunning General Cutting InstructionsFelling a Tree Kickback Skill levels Maintenance and CareMaintenance intervals Fuel strainer Air filterAutomatic oiler Oil strainerSpark plug Cooling system cleaningGuide bars and oil holes SprocketLevel Exhaust Port CleaningMuffler spark arrestor Starter SidePage Lo hi Carburetor adjustmentEngine Break-In High Altitude OperationFollowing combinations may be used on CS-330T and CS-360T High Altitude AdjustmentChain and Guide Bar Combinations Chain type and sprocket pitch Setting the saw chainEngine Problem Troubleshooting Chart TroubleshootingCorrect Use of Chain Brake Storage After USEInstallation Model CS-330T CS-360T Technical DataExceptions Warranty Statements99922201032 11/18/2011 Purchased Repair PARTS, Short Blocks and Accessories99922201033 Servicing Information parts/serial number ServiceWarranty registration Additional or replacement manuals

CS-360T, CS-330T specifications

The Echo CS-330T and CS-360T are two impressive chainsaws designed for both professionals and avid DIY enthusiasts. Known for their durability, ease of use, and powerful performance, these models are perfect for tackling various cutting tasks in gardens, forests, and construction sites alike.

The Echo CS-330T features a 30.5cc professional-grade, 2-stroke engine that delivers a powerful performance while ensuring efficiency. This lightweight engine design allows for easy handling and reduces user fatigue during extended use. The CS-330T also boasts a 12-inch bar, making it an ideal tool for pruning, trimming, and safely felling smaller trees with precision.

On the other hand, the CS-360T is equipped with a more powerful 35.8cc engine, providing an even higher performance level for more demanding tasks. The CS-360T's 14-inch bar is perfectly suited for medium-sized trees and larger cutting jobs. Both saws feature a powerful fuel delivery system that ensures quick starts, allowing users to get to work faster and more efficiently.

One notable characteristic of the Echo chainsaws is their innovative Accu-Fire ignition system. This technology enhances starting ease and provides a reliable spark, minimizing the chances of stalling during operation. Additionally, the saws are designed with an automatic oiler, which ensures the chain remains lubricated for smoother cutting and increased longevity.

Weighing in at just 8.6 lbs for the CS-330T and 9.5 lbs for the CS-360T, both models offer a balance of lightness and power, making them highly maneuverable on the job. The ergonomic handle design contributes to user comfort, while the adjustable throttle trigger allows for better control over cutting speed, adapting seamlessly to various tasks.

For safety, the Echo CS-330T and CS-360T are equipped with critical features such as a chain brake that instantly halts the chain in emergencies, reducing the risks associated with accident-prone cutting tasks. The ease of maintenance is also a key advantage, with tool-less chain tensioning for quick adjustments.

In conclusion, the Echo CS-330T and CS-360T chainsaws combine lightweight power, advanced technology, and essential safety features, making them perfect for a wide range of cutting applications. Whether you're a professional or a hobbyist, these chainsaws offer the reliability and performance needed for effective and efficient work.
Top Page Image Contents