Dixon ZTR 5005, ZTR 5004 manual Controls, Control Levers

Page 16

CONTROLS

CONTROL LEVERS

Note: For access to the seat, move control levers to neutral position and swing them outward.

TO GO FORWARD:

From neutral position, gently push both control levers forward.

To increase speed, move levers further forward.

TO GO BACKWARD:

From neutral position, gently pull both control levers toward you.

TURNING:

Turning is controlled by moving one control lever slightly forward or rearward of the other.

To turn left, move left lever rearward of the right lever.

To turn right, move right lever rearward of the left lever.

To turn on mower’s own axis (zero turning radius), stop and move one lever to reverse position and the other to forward position.

BRAKING:

To brake mower, move both levers in direction opposite of travel.

LEFT TURN OPPOSITE

Note: The pressure required to operate the mower is very light.

16

Image 16
Contents Series Important Read Carefully Safety Warranty Policy IndexSafety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Do notChildren Never allow children to operate the mowerService Service Dixon Limited Warranty Policy Hydro Gear Models 5000 6000 7000 Series MowersSpecifications Specifications Model ZTRSeat Adjustment Instructions Controls Control LeversChoke Control Lever Throttle Control LeverHydro Gear System Parking BrakeTo SET Parking Brake Circuit Breaker Blade DriveMower Deck CUT Height Lift Lever To Free Wheel Machine Unlock Transmission Operation Instructions TowingBefore Operating Mower Parking Brake Switch Test Engine should StopSide Discharge of the Clippings Grass Height and Cutting Suggestions Starting Instructions engine has been operated Starting Instructions cold engine Mowing with a Mulching Attachment Mowing with a Mulching Attachment CUT High MOW OftenMowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Deck Rollers 60 deck Care and Maintenance Maintenance ScheduleBattery OFF Season Battery StorageEngine TiresCutter Blade Maintenance Belts Belt TensionFuel Shut OFF Valve LubricationChassis LocationsChanging the Engine OIL OIL Fill OIL FiltersHydrostatic Transmission OIL & Filter Service Care and Maintenance Recommended OIL Weight Service IntervalsOIL Requirements Cleaning the Mower WarrantyPARTS/SERVICE Electrical SystemsMower Deck Leveling Procedure Mower Deck Leveling Procedure Mower Deck Removal BOX to Hydrostat Belt Adjustment Parking Brake Cable Adjustment Rear Wheels Wheel ReversalNeutral Adjustment Neutral Adjustment Procedure for Electric Clutch Adjustment AIR GAP AdjustmentOhms Test Forward Travel Speed Adjustment Troubleshooting Engine Stalls When Blades are Engaged Engine Runs but Mower WON’T Move ForwardDrive System CUT QualityStandard Service Parts List DeckKawasaki and Kohler AIR & OIL Filter Part Numbers Owner Information Name AddressZTRMowers