CONTROLS
BLADE DRIVE:
•Located on control panel to operator’s right.
To engage blade: Pull up on switch.
To disengage blade: Push down.
CIRCUIT BREAKER:
• Located on control panel to operator’s right.
• Protection of the electrical system is by (1) 15 amp circuit breaker.
• If circuit breaker trips, push button to reset.
•If this condition repeats, consult dealer for inspection and repair.
MOWER DECK CUT HEIGHT LIFT LEVER:
• Located to the right and front of operator.
• Controls the cutting height.
• Seven positions of adjustment.
• Depress trigger and move lever forward to lower deck.
• Depress trigger and pull lever back to raise deck.
NOTE: Always use high position for transport.
19