Dixon 13090-0601, ZTR 6023 manual Hydrostatic Transmission

Page 29

CARE AND MAINTENANCE

HYDROSTATIC TRANSMISSION:

Before each use, check to be sure that the cooling fins of the hydrostatic transmission are clean. Excessive accumulation of oil, dirt, or trash may cause the transmission to overheat. NEVER WASH ACROSS TOP OF RESERVOIR with water or steam. Fill reservoir as required per instructions below.

CHECKING & REPLENISHING OIL IN HYDROSTATIC TRANSMISSION:

Check the oil level in hydrostatic transmission oil reservoir after every 25 hours of usage. Do not remove the reservoir cap to check the oil level as this allows dirt to enter the transmission. Replenish as needed with SAE 20W-50 motor oil. Any high quality engine oil with an API classification

Hydrostatic

of SG/CD is recommended. Transmission

Oil Reservoir

A. Wipe area of oil reservoir cap clean of dirt & debris.

B. Remove oil reservoir cap. C. Fill to line marked on reservoir.

D. Do not overfill.

E. When checking oil level, be very

careful to keep the reservoir clean and fill only with clean oil. Hydrostatic Transmisson

Filter

Change the oil in the reservoir

and hydrostat transmission oil filter after the first 100 hours of use. Then every 500 hours after that. Remove the filter and be sure all oil has drained from the reservoir. Replace with new Dixon filter P/N 7252 and SAE 20W-50 motor oil.

29

Image 29
Contents OPERATOR’S Manual Important Read Carefully Index Safety Safety Alert Symbol General Operation General Operation Do not mow it Slope OperationNever allow children to operate the mower ChildrenService Service Dixon Limited Warranty Policy Commercial Models Series Forward Mount SpecificationsSeries Seat Adjustment InstructionsControl Levers ControlsTo SET Parking Brake Parking BrakeChoke Control Lever Mower Blade SwitchThrottle Control Lever Circuit BreakerBefore Operating Mower Operation InstructionsTowing Interlock Switch Test Starting Instructions cold engine Starting Instructions engine has been operated Mowing Instructions To Free Wheel Machine Unlock transmission for towing Grass Height and Cutting Suggestions Maintenance Schedule Care and MaintenanceTires BatteryEngine Mower Blades Scalper Roller Bolts BeltsLubrication Checking & Replenishing OIL in Hydrostatic Transmission Hydrostatic TransmissionParking Brake Adjustment Changing the Fluid in Deck Drive Gearbox Check Deck Drive Gearbox Fluid LevelHydrostat Drive Belt Tension Adjustment To adjust neutral Steering Control AdjustmentsTo adjust in position of the steering controls Steering Control AdjustmentsAdjusting for Straight Forward Tracking Lower & Reattach the DECKsee diagram-page Tilting the Deck see diagram-page37Down Hanger Engaged Position Leveling the Deck Deck Spindle Belt Diagram TOP View Troubleshooting Engine Backfires Model ZTR Standard Service Parts ListOwner Information ZTRMowers