Desa Td125, Td126, Td127, Td128 owner manual Safety

Page 3

Safety

Continued

This is a propane, direct-fired heater. Propane is heavier than air. If propane leaks from a connection or fitting, it sinks to the floor, col- lecting there with the surrounding air, forming a potentially explosive mixture. Obviously, propane leaks should be avoided, so set up the propane supply with utmost care. Read Propane/LP Safety, page 4 for additional in- formation about detecting propane leaks. Leak check new connections or reconnections with a noncorrosive leak detection fluid and follow all connection instructions herein. Also, ask your propane dealer for advice on the propane ap- plication and supply installation and ask them to check it if there are any questions.

When the heater is to be operated in the pres- ence of other people the user is responsible for properly acquainting those present with the safety precautions and instructions, and of the hazards involved.

Make certain you read and understand all warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

1.State of Massachusetts: The installation must be made by a licensed plumber or gas fitter in the Commonwealth of Mas- sachusetts.

2.Check heater thoroughly for damage. DO NOT operate a damaged heater.

3.DO NOT modify heater or operate a heater which has been modified from its original condition.

4.Use only propane/LP gas.

5.Use only VAPOR WITHDRAWAL pro- pane supply. The propane cylinder must be arranged for vapor-withdrawal, in accordance with the Compress Gas As- sociations, Small Propane Bottle Assem- bly. If there is any question about vapor withdrawal, ask your propane dealer.

6.Use only hose and regulator assembly provided with heater.

7.Inspect hose assembly before each use of heater. If there is excessive abrasion or wear, or hose is cut, replace with hose assembly listed on parts list before using heater.

8.This heater is for OUTDOOR USE ONLY.

Make sure there is ample fresh air ventila- tion. Do not use in buildings, garages or other enclosed spaces.

9.If at any time gas odor is detected, IM- MEDIATELY DISCONTINUE operation until source of gas has been located and corrected. Read Propane/LP Safety, page

4 for additional information about detect- ing propane leaks.

10.Do not expose heater to water spray, rain and/or dripping water.

11.Maintain minimum clearance to people or normal combustible material (paper) of 3 ft. (91.44 cm) from top and 2 ft. (60.96 cm) from reflector.

12.Operate only on a stable, level surface.

13.Do not spray aerosols near heater during use or shortly thereafter.

14.Do not clean heater with combustible or corrosive cleaners. Use a noncorrosive leak detection fluid.

15.Check control compartment burners and circulation air passageways for free air passage. Make sure there are no obstruc- tions. These areas are a common location for spider webs, which can present a dangerous condition, damage heater and render it unsafe for use. Heater must be checked if any of the following conditions exist:

a)Gas smell along with predominate yel- low tipping of burner.

b)Heater does not reach temperature.

c)Uneven burner glow.

d)Burner makes popping noises during nor- mal use, other than during shutdown.

16.Use only a noncorrosive leak detection fluid to conduct leak tests whenever a propane cylinder is connected. Bubbles indicate a leak.

17.Do not adjust gas regulator. If you are unsure of your appliances gas type or pressure, call a qualified service person.

18.Place control knob in OFF position when heater is not in use.

19.Always disconnect gas supply after heater is turned OFF.

20.Do not move, handle or service while hot or burning.

21.Allow 45 minutes to cool down after use before attempting to move heater.

22.Do not operate this appliance in windy conditions. Maximum allowable wind speed is 10 mph (16 Km/h).

121117-01Bwww.desatech.com

Page 2 Page 4
Image 3
Page 2 Page 4
Contents TD125, TD126, TD127 and TD128 ModelsTable of Contents SpecificationsSafety Safety Propane/LP Safety Unpacking HeaterAsphyxiation Hazard Tools Required AssemblyAttaching Tank Door Sliding Manifold and Burner Checking for Leaks Propane Tank and Safety ChainPreparing for Operation Locating HeaterOperation If odor continues, immediately call your gas supplierStorage To LightTo Shut Down Parts Not Under Warranty Replacement PartsTechnical Service Parts Under WarrantyModels TD125, TD126, TD127, TD128 PartsKEY NO. Part NO. Description 121117-01B 121117-01B Warranty Keep this WarrantyLimited Warranty ADVERTENCIAparauso en exteriores solamente ModelosTD125, TD126, TD127 y TD128 Tabla de contenido EspecificacionesSeguridad Continuación Seguridad Seguridad del propano o gas LP Desempaque del calentadorPeligro de asfixia Herramientas necesarias EnsambleFigura 5 Instalación de la puerta de tanque En el conjunto del quemador Figura 14 Tanque de propano y cadena Revisión de fugasUbicación del calentador FuncionamientoPreparación Para LA Operación Para Apagar Para EncenderMantenimiento AlmacenamientoPiezas de repuesto Servicio técnicoPiezas sin garantía Modelos TD125, TD126, TD127, TD128 PiezasDE Parte Descripción Garantía Guarde Esta GarantíaGarantía Limitada TD125, TD126, TD127 et TD128 ModèlesTable des matières CaractéristiquesSécurité Suite Sécurité Sécurité des installations au propane ou au GPL Déballage de lappareil de chauffageRisque dasphyxie Outils nécessaires AssemblageMontage de la porte du réservoir Montage du collecteur et de Lassemblage du brûleur Bouteille de propane et Chaîne de sécurité Recherche de fuitesPositionnement de l’appareil de chauffage FonctionnementPréparation AU Fonctionnement Pour Arrêter Pour AllumerEntretien EntreposageService technique Pièces de rechangePièces qui ne sont pas sous garantie Modèles TD125, TD126, TD127, TD128 PiècesQTÉ Garantie Conservez Cette GarantieGarantie Limitée

Td125, Td126, Td127, Td128 specifications

Desa Td125, Td126, Td127, and Td128 are a series of robust and versatile machines that cater to various industrial needs. Each model in this lineup is uniquely engineered to deliver outstanding performance while incorporating innovative technologies that enhance their functionality and usability.

The Desa Td125 is known for its compact design and lightweight structure, making it highly maneuverable in tight spaces. This model features an advanced hydraulic system that ensures smooth operation, even under heavy loads. The Td125 is equipped with a user-friendly interface that allows operators to easily control and monitor the machine’s performance. Its powerful engine provides ample torque, making it ideal for both indoor and outdoor applications.

The Td126 builds upon the strengths of the Td125, offering increased power and a broader range of functionalities. Its enhanced lifting capacity allows it to handle larger loads with ease. One of the standout features of the Td126 is its intelligent control system that optimizes performance based on real-time data, improving efficiency and reducing fuel consumption. This model is particularly favored in construction and logistics environments where reliability and performance are paramount.

Moving on to the Desa Td127, this model is characterized by its durability and rugged design, suitable for the most demanding tasks. The Td127 incorporates heavy-duty components and is built to withstand harsh working conditions. Its advanced safety features, including automated shutdown systems and emergency brakes, ensure the protection of both the operator and the machine. The model is also customizable, allowing businesses to tailor the machine to their specific requirements.

Lastly, the Td128 represents the pinnacle of the series, boasting cutting-edge technology and superior performance capabilities. It introduces an eco-friendly engine that meets stringent emission standards while providing increased power output. The Td128 also features telematics capabilities, enabling remote monitoring and diagnostics to maximize uptime and facilitate maintenance planning. Its ergonomic design prioritizes operator comfort, reducing fatigue during long working hours.

Together, the Desa Td125, Td126, Td127, and Td128 models present a comprehensive range of solutions for industries that demand reliability, efficiency, and technological innovation. With their respective features, these machines stand out as exemplars of modern engineering, capable of meeting a diverse array of operational challenges.
Top Page Image Contents