Chicago Electric 91995 operating instructions Assembly and Operating Instructions

Page 11

ASSEMBLY AND OPERATING INSTRUCTIONS

Note: For additional references to the parts listed in the following pages, refer to the

Assembly Diagram on page 24.

To Replace And Install A Saw Blade:

1.WARNING! Prior to performing any assembly and/or adjustment procedures, make sure the Power Cord (102) of the Miter Saw is unplugged from its electrical outlet. Make sure the unit has completely cooled, and wear heavy-duty work gloves.

2.When replacing the Saw Blade (56), make sure the new Saw Blade has a diameter of 10”, an RPM rating of at least 7000, and an arbor hole of 5/8” diameter.

SAW BLADE (56)

ARROW

COVER CASE (89)

ARROW

SAW TEETH

POINTING DOWN

FIGURE D

3.When installing a Saw Blade (56), make sure the teeth of the Saw Blade point downward, and that the direction of the arrow shown on the Saw Blade matches the direction of the arrow shown on the Cover Case (89). (See Figure D.)

4.Lock the Saw Blade (56) in its upward position. To do so, pull out on the Cross Pin (28). Raise and hold the Cover Case (89) of the Miter Saw fully upward. Turn the Cross Pin 90 degrees. Then, insert the Cross Pin into the deep slot in its locked position. (See Figures E and F, next page.)

Rev 07k

SKU 91995

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callUnpacking SpecificationsGeneral Safety Rules Work AreaPersonal Safety Electrical SafetyTool USE and Care Specific Safety Rules ServiceSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq See Table a Improperly connecting the grounding wire can resultElectric shock See 3-Prong Plug and Outlet12.1 16.0 16.1 20.0 FeetAssembly Diagram on To Replace And Install a Saw Blade Assembly and Operating InstructionsFigure E See Figure H See Figure GSee Figure Figure JSee Figure K To Assemble Additional AccessoriesSafety Cover See Figure L Never disconnect Or remove Safety CoverPower Switch Dust Bag To Adjust The Cutting DepthTo Adust The Bevel Of Cut To Adjust The Miter AngleSee Figure O Basic Operation See Figure PINSPECTION, MAINTENANCE, and Cleaning Figure Q Please Read the Following CarefullyDescription Parts ListAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents