Chicago Electric 91995 operating instructions SKU For technical questions, please call

Page 7

15.The Cross Pin (28) should always be in the “locked down” position when the Saw is not being used and when the Saw is being transported. The Cross Pin should be activated in the “locked up” position when changing Saw Blades. NEVER use the Cross Pin in any cutting operation. The Cross Pin allows the operator to lock the Saw Blade in position, preventing the Saw Blade from being raised or lowered.

1. Allow the Saw Blade to spin up to full speed before feeding it into the workpiece. Do not force the Saw Blade into the workpiece when cutting. Apply moderate pressure, allowing the Saw Blade to cut without being forced. When turning off the Saw, allow the Saw Blade to spin down and stop on its own. Do not press against the Saw Blade to stop it.

1. Turn off the Saw and allow the Saw Blade to stop on its own if the Saw

Blade is to be backed out of an uncompleted cut.

1. Industrial applications must follow OSHA requirements.

19.Proper Miter Saw location: Make sure the Miter Saw is located on a flat, level, sturdy surface capable of supporting the weight of the Miter Saw, workpieces, and all other tools and accessories.

20.Do not abuse the Power Cord. Do not use the Power Cord to pull the Power Plug from an electrical outlet. Keep the Power Cord away from heat, oil, sharp edges, and moving parts. Route the Power Cord safely. Do not route the Power Cord where it can be walked on or tripped over. Replace a damaged Power Cord immediately.

21.Keep all safety guards in place, in proper adjustment, and in proper alignment.

22.Never attempt to remove material stuck in the moving parts of the Miter Saw while the machine is plugged in and running.

23.Whenever possible, use clamps or other safe, practical ways to hold and support the workpiece. Do not attempt to cut material that does not have a flat surface, unless a suitable support is used.

24.Always keep hands and fingers away from the spinning Saw Blade.

25.Use eye, hearing, and breathing protection. Always wear ANSI-approved safety impact eye goggles, hearing protectors, and dust masks or respirator when working with the Miter Saw.

2. Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

SKU 91995

For technical questions, please call 1-800-444-3353.

Page 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callUnpacking SpecificationsGeneral Safety Rules Work AreaPersonal Safety Electrical SafetyTool USE and Care Specific Safety Rules ServiceSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq See Table a Improperly connecting the grounding wire can resultElectric shock See 3-Prong Plug and Outlet12.1 16.0 16.1 20.0 FeetAssembly Diagram on To Replace And Install a Saw Blade Assembly and Operating InstructionsFigure E See Figure H See Figure GSee Figure Figure JSafety Cover To Assemble Additional AccessoriesSee Figure K Power Switch Never disconnect Or remove Safety CoverSee Figure L Dust Bag To Adjust The Cutting DepthSee Figure O To Adjust The Miter AngleTo Adust The Bevel Of Cut Basic Operation See Figure PINSPECTION, MAINTENANCE, and Cleaning Figure Q Please Read the Following CarefullyDescription Parts ListAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents