Chicago Electric 91995 operating instructions INSPECTION, MAINTENANCE, and Cleaning

Page 20

6.Plug the Power Cord (102) into the nearest 120 volt, grounded, electrical outlet.

7.Squeeze the Power Switch (98) to turn on the Miter Saw.

8.When the Saw Blade (56) is turning at full speed, slowly bring down the Motor Housing (75) to complete the cut. NOTE: Feed the Saw Blade into the workpiece gradually. Do not force the machine to remove material faster than it was designed to cut.

9.When cutting a large workpiece, make sure its entire length is properly supported. If necessary, use a roller stand (not included) with a larger workpiece.

10.Never attempt to remove material stuck in the moving parts of the Miter Saw while it is plugged in and running.

11.Turn off the Miter Saw if the workpiece is to be backed out of an uncompleted cut.

12.When the cut is complete, release the Power Switch (98) to turn off the Miter Saw.

13.Wait until the Saw Blade (56) comes to a complete stop. Raise the Motor Housing (75). Then, unplug the Power Cord (102) from its electrical outlet.

14.Loosen the Clamp Assembly (36), and remove the workpiece and scrap material from the Table (18).

INSPECTION, MAINTENANCE, AND CLEANING

1.WARNING! Always make sure the Power Switch (98) is in its “OFF” position, and unplug the Power Cord (102) from its 120 volt electrical outlet before performing any inspection, adjustments, maintenance, or cleaning. Make sure the power tool is cool to the touch before inspection, maintenance, and cleaning begin. Always protect your hands by wearing work gloves.

2.Before each use, inspect the general condition of the Miter Saw. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, loose, cracked, or bent Saw Blade (56), and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment. Never work with a dull saw blade.

SKU 91995

For technical questions, please call 1-800-444-3353.

Page 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSpecifications General Safety RulesWork Area UnpackingElectrical Safety Personal SafetyTool USE and Care Service Specific Safety RulesSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq Improperly connecting the grounding wire can result Electric shockSee 3-Prong Plug and Outlet See Table aFeet 12.1 16.0 16.1 20.0Assembly and Operating Instructions Assembly Diagram on To Replace And Install a Saw BladeFigure E See Figure G See Figure HFigure J See FigureSee Figure K To Assemble Additional AccessoriesSafety Cover See Figure L Never disconnect Or remove Safety CoverPower Switch To Adjust The Cutting Depth Dust BagTo Adust The Bevel Of Cut To Adjust The Miter AngleSee Figure O See Figure P Basic OperationINSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Figure QParts List DescriptionAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents