Chicago Electric 91995 operating instructions SKU For technical questions, please call

Page 6

10.Before using the Miter Saw, make sure the Saw Blade is properly mounted on the Saw Spindle. Make sure the Saw Blade is balanced, and is not cracked or bent.

11.The Saw Blade will become hot while cutting. Allow the Saw Blade to completely cool before touching.

12.Make sure the workpiece is free from nails and any other foreign objects which can damage the Saw Blade.

13.Keep your body positioned to either side of the Saw Blade, but not in line with the Saw Blade. “Kickback” can cause the Saw to jump backwards.

14.Causes and operator prevention of “kickback”: Kickback is a sudden reaction to a pinched, bound, or misaligned Saw Blade, causing an uncontrolled Saw to lift up and out of the workpiece toward the operator. When the Saw Blade is pinched or bound tightly by the kerf closing down, the Saw Blade stalls and the Motor reaction drives the tool rapidly toward the operator. If the Saw Blade becomes twisted or misaligned in the cut, the teeth at the back edge of the Saw Blade can dig into the top surface of the workpiece, causing the Saw Blade to climb out of the kerf and jump toward the operator. Kickback is a result of tool misuse and/or incorrect operating procedures or conditions and can be minimized by taking proper precautions as given below:

a.Maintain a firm grip with both hands on the Saw, and position your body and arm to allow you to resist kickback forces.

b.When the Saw Blade is binding, or when interrupting a cut for any reason, release the Power Switch and hold the Saw motionless in the workpiece until the Saw Blade comes to a complete stop. Never attempt to remove the Saw Blade from the workpiece or pull the Saw backward while the Saw Blade is in motion or kickback can occur.

c.When restarting the Saw in the workpiece, center the Saw Blade in the kerf and check that the saw teeth are not engaged into the workpiece. If the Saw Blade is binding, it may walk up or kickback from the workpiece as the Saw is restarted.

d.Support large panels to minimize the risk of Saw Blade pinching and kickback. Large panels tend to sag under their own weight. Supports must be placed under the panel on both sides, near the line of cut and near the edge of the panel.

e.Do not use a dull or damaged Saw Blade. Unsharpened or improperly set Saw Blades produce a narrow kerf causing excessive friction, Saw Blade binding and kickback.

f.Make sure all Saw adjustments are tight and secure before making a cut. If Saw adjustments shift while cutting, it may cause binding and kickback.

SKU 91995

For technical questions, please call 1-800-444-3353.

Page 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsWork Area SpecificationsGeneral Safety Rules UnpackingElectrical Safety Personal SafetyTool USE and Care Service Specific Safety RulesSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq See 3-Prong Plug and Outlet Improperly connecting the grounding wire can resultElectric shock See Table aFeet 12.1 16.0 16.1 20.0Assembly and Operating Instructions Assembly Diagram on To Replace And Install a Saw BladeFigure E See Figure G See Figure HFigure J See FigureTo Assemble Additional Accessories Safety CoverSee Figure K Never disconnect Or remove Safety Cover Power SwitchSee Figure L To Adjust The Cutting Depth Dust BagTo Adjust The Miter Angle See Figure OTo Adust The Bevel Of Cut See Figure P Basic OperationINSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Figure QParts List DescriptionAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents