Chicago Electric 91995 operating instructions Tool USE and Care

Page 4

3.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.

4.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

.Use safety equipment. Always wear ANSI approved safety glasses underneath a full face shield, a dust mask or respirator, and hearing protection.

TOOL USE AND CARE

1.Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand is unstable and may lead to loss of control. Only work on a workpiece that is properly secured.

2.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

3.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

4.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

5.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

.Maintain tools with care. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

.Check for misalignment or binding of moving parts, breakage of parts, cracking or breakage of the Saw Blade, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SKU 91995

For technical questions, please call 1-800-444-3353.

Page

Page 3 Page 5
Image 4
Page 3 Page 5
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSpecifications General Safety RulesWork Area UnpackingElectrical Safety Personal SafetyTool USE and Care Service Specific Safety RulesSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq Improperly connecting the grounding wire can result Electric shockSee 3-Prong Plug and Outlet See Table aFeet 12.1 16.0 16.1 20.0Assembly and Operating Instructions Assembly Diagram on To Replace And Install a Saw BladeFigure E See Figure G See Figure HFigure J See FigureSafety Cover To Assemble Additional AccessoriesSee Figure K Power Switch Never disconnect Or remove Safety CoverSee Figure L To Adjust The Cutting Depth Dust BagSee Figure O To Adjust The Miter AngleTo Adust The Bevel Of Cut See Figure P Basic OperationINSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Figure QParts List DescriptionAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents