Chicago Electric 91995 operating instructions Please Read the Following Carefully, Figure Q

Page 21

3.Daily: With a soft brush, cloth, or vacuum, remove all dust and debris from

the Miter Saw. Then, use a premium quality, lightweight machine oil to lubricate all moving parts except the Saw Blade (56).

4.To replace the Motor Carbon Brushes: It may become necessary at some- time to replace the two Carbon Brushes (73) when the Motor performance de- creases, or stops working completely. The Carbon Brushes are located on each side of the Motor Housing (75). To do so, remove the two Brush Covers (72). Then, remove the two Carbon Brushes from the Brush Holders (74).

If the Carbon Brushes are worn down more than 1/2, replace both Carbon Brushes. If, however, the Carbon Brushes are just dirty they may be cleaned by rubbing them with a pencil eraser. When installing the Carbon Brushes, make sure the carbon portion of the Carbon Brushes contact the Motor Armature, and that the springs face away from the Motor. Also, make sure the springs operate freely. After cleaning or replacement, replace the Brush Holders.

NOTE: New Carbon Brushes tend to arc or spark when first used until they wear and conform to the Motor’s Armature. (See Figure Q.)

5.NOTE: With the exceptions of Steps #1, #2, #3, and #4 all other maintenance and servicing should be performed only by a qualified service technician.

FIGURE Q

CARBON BRUSH (73) (NOT SHOWN)

CARBON BRUSH

(73)

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THATALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 91995

For technical questions, please call 1-800-444-3353.

Page 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callGeneral Safety Rules SpecificationsWork Area UnpackingPersonal Safety Electrical SafetyTool USE and Care Specific Safety Rules ServiceSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq Electric shock Improperly connecting the grounding wire can resultSee 3-Prong Plug and Outlet See Table a12.1 16.0 16.1 20.0 FeetAssembly Diagram on To Replace And Install a Saw Blade Assembly and Operating InstructionsFigure E See Figure H See Figure GSee Figure Figure JTo Assemble Additional Accessories Safety CoverSee Figure K Never disconnect Or remove Safety Cover Power SwitchSee Figure L Dust Bag To Adjust The Cutting DepthTo Adjust The Miter Angle See Figure OTo Adust The Bevel Of Cut Basic Operation See Figure PINSPECTION, MAINTENANCE, and Cleaning Figure Q Please Read the Following CarefullyDescription Parts ListAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents