Chicago Electric 91995 operating instructions Dust Bag, To Adjust The Cutting Depth

Page 17

The Dust Bag:

1.The Dust Bag (93) catches and holds the wood chips and saw dust when the Miter Saw is in operation. (See Figure N.)

2.The outside diameter of the Dust Tube (94) is 1-3/4”to which the Dust Bag (93) or a vacuum hose (not included) may be attached. It is recommended that only a qualified technician perform this procedure. (See Figure N.)

DUST BAG (93)

 

DUST TUBE (94)

 

 

FIGURE N

To Adjust The Cutting Depth:

1.WARNING! Prior to performing this procedure, make sure the Power Cord (102) of the Miter Saw is unplugged from its electrical outlet.

2.The depth of cut may be adjusted to a maximum of 4-11/16” at 90,o and 4-11/16” at 45°.

3.Slightly loosen the Screw (92) and pull the Miter Saw’s Cover Case (89) down- ward as far as it will go. Observe whether the edge of the Saw Blade (56) passes completely through the Kerf Board (11). (See Figure O, next page. )

4.If the Saw Blade (56) does not pass completely through the Kerf Board (11), lower the Saw Blade further by loosening the Screw (92). (See Figure O.)

5.After adjusting the Screw (92), press down on the Miter Saw and make sure the Saw Blade (56) does not contact the bottom of the Table (18) or any other part of the Saw Base (8). (See Figure O.)

SKU 91995

For technical questions, please call 1-800-444-3353.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callGeneral Safety Rules SpecificationsWork Area UnpackingPersonal Safety Electrical SafetyTool USE and Care Specific Safety Rules ServiceSKU For technical questions, please call SKU For technical questions, please call California Health & Safety Code 25249.5, et seq Electric shock Improperly connecting the grounding wire can resultSee 3-Prong Plug and Outlet See Table a12.1 16.0 16.1 20.0 FeetAssembly Diagram on To Replace And Install a Saw Blade Assembly and Operating InstructionsFigure E See Figure H See Figure GSee Figure Figure JSee Figure K To Assemble Additional AccessoriesSafety Cover See Figure L Never disconnect Or remove Safety CoverPower Switch Dust Bag To Adjust The Cutting DepthTo Adust The Bevel Of Cut To Adjust The Miter AngleSee Figure O Basic Operation See Figure PINSPECTION, MAINTENANCE, and Cleaning Figure Q Please Read the Following CarefullyDescription Parts ListAssembly Diagram

91995 specifications

Chicago Electric 91995 is a versatile and robust arc welder admired for its performance in various welding tasks. It stands out as a reliable choice for both professionals and DIY enthusiasts seeking to tackle welding projects at home or on a job site. This machine shines particularly in MIG welding, but it also has the capability to handle flux core welding, making it suitable for a wide array of applications including automotive repair, metal fabrication, and home improvement tasks.

One of the main features of the Chicago Electric 91995 is its adjustable output power. The welder is equipped with a control panel that allows users to select different voltage settings, which improves its versatility and accommodates a range of materials and thicknesses. Depending on the project requirements, users can dial in the appropriate power setting to achieve the desired weld penetration and heat input.

Another notable characteristic of the 91995 is its portability. Weighing in at about 45 pounds, the portable design makes it easy to transport and maneuver, which is particularly beneficial for those who may need to work in various locations. The compact size, coupled with a durable construction, ensures that it can withstand the rigors of job site conditions while remaining lightweight enough for home use.

The machine is designed with user-friendly features, including an intuitive interface that simplifies the welding process. Beginners can quickly learn how to operate the device due to its straightforward controls, while experienced welders appreciate the flexibility it offers. Additionally, the unit comes with a safety feature that prevents overheating, which protects both the welder and the workpiece.

Chicago Electric 91995 also includes integral features such as a built-in cooling fan that aids in maintaining optimal operating temperatures during prolonged use. Its ground clamp and electrode holder are designed for easy attachment and disconnection, enhancing user convenience and work efficiency.

In summary, the Chicago Electric 91995 welder combines power, portability, and user-friendly features, making it a dependable option for a variety of welding applications. Whether for hobbyists or professionals, its technological advancements and solid performance make it a valuable addition to any toolbox.
Top Page Image Contents