Casablanca Fan Company PN9943001 warranty Figure #7

W-84 Wall Control Bezel replacement: - CONTINUED

Step 1e. To attach the bezel back on to the front of the switch you will need to align the four (4) tabs on the bezel with the front of the wall control and by gently pressing on both top and bottom of the bezel at the same time, snap the bezel back on to the front of the switch as shown in both figures #6.

Step 1f. Re-attach the wall plate using the two (2) almond screws as shown in Figure #7. Check your work by pressing on the light, fan, reverse and power buttons, making sure that the buttons do not stick and that each switch functions properly. Turn the power back ON and test the fan and lights.

ALMOND

COLORED

BEZEL

BEZEL

BEZEL

TABS

BEZEL

ALIGNMENT

PIN AND HOLE

Figure #6

ALMOND

WALL PLATE

SCREWS

ALMOND

COLORED

WALL PLATE

Figure #7

21