Casablanca Fan Company PN9943001 Disassemble Canopy and Motor Covers, Install Canopy Cover

Page 8

DISASSEMBLE CANOPY AND MOTOR COVERS

Step 10. Remove the screws from the canopy cover and
the motor cover and set aside for later use.	MOTOR
	COVER

CANOPY

COVER

INSTALL CANOPY COVER

Step 11. Take the two pieces of the canopy cover and assemble them around the downrod as shown. Using the four screws removed in Step 10, assemble the canopy cover.

Slide the canopy cover to the ceiling and secure to the downrod using the two provided screws. Tighten by hand only.

CANOPY

COVER

SCREWS FROM

STEP 10

CAUTION: The canopy cover can NOT be used on sloped ceilings.

PROVIDED

SCREWS

INSTALL MOTOR COVER

Step 12. Take the two pieces of the motor cover and assemble them around the downrod as shown. Using the two screws removed in Step 10, assemble the motor cover.

Slide the motor cover down onto the top of the fan and secure to the downrod using the two provided screws.

Using the screwdriver, tighten securely by hand only.

SCREWS FROM

STEP 10

PROVIDED

SCREWS

8

Image 8

Contents Safety First Sloped Ceiling Installations Mounting RecommendationsInstall Rubber Gasket Install Metal GasketPreparation Instructions Getting StartedPrepare for fan installation as follows Installing a New Ceiling Fixture Outlet BoxUsing Existing Ceiling Fixture Outlet Box FAN Preparation Ceiling Hardware Support Installation Parts Crossbar Mounting Bracket Installation Canopy Hardware Canopy InstallationLAG Screww Insatallation Canopy Electrical Connections Canopy Hatch InstallationHangingthe FAN Disassemble Canopy and Motor Covers Install Canopy CoverInstall Motor Cover Attach Blade Holders Install Blade AssemblyBlade Hardware Switch Housing CUP Installation Prepare for W-84 Wall Control Bezel replacement as follows Wall Control PreparationPrepare for W-84 Wall Control installation Almond BezelControl Installation Installing the W-84 Wall Control Single W-84 InstallationDual W-84 Installation Light button Operation PowerTo dim both lights at the same time To dim just the down light Changing Frequency SettingTo dim just the up light Automatic Demonstration Program Operation SAFE-EXITAND LIGHT-MINDERPROGRAMTo enter the demonstration program To enter the Light-Minder ProgramOperation HOME-SAFEPROGRAM Operation FAN-MINDERPROGRAMWall Bezel Replacement ScrewsWall Control Bezel replacement Locating Pins HOLES4 Rubber KEY PADFigure #7 Troubleshootingtips Product Specifications Care Recommendations