Briggs & Stratton 5900611 Slope Operation, Towed Equipment RIDE-ON Units, Children, Emissions

Page 9

23.Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

24.To reduce fire hazard, keep unit free of grass, leaves & excess oil. Do not stop or park over dry leaves, grass or combustible materials.

25.The engine in this unit is not factory equipped with a spark arrester. It is a violation of California Public Resource Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal area may have similar laws.

26.OSHA regulations may require the use of hearing protection when exposed to sound levels greater than 85 dBA for an 8 hour time period.

CAUTION

This machine produces sound levels in excess of 85 dBA at the operator’s ear and can cause hearing loss

though extended periods of exposure.

Wear hearing protection when operating this machine.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not drive on it.

WARNING

Do not use this machine on slopes greater than 15°.*

Select slow ground speed before driving onto slope. Use extra caution when operating on slopes with rear-mounted grass catchers.

Mow across the face of slopes, not up and down, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

Do

1.Mow across slopes, not up and down.

2.Remove obstacles such as rocks, tree limbs, etc.

3.Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

4.Use slow speed. Choose a slow speed so that you will not have to stop or change speed while on the slope.

5.Use extra care with grass catchers or other attachments. These can change the stability of the unit.

6.Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

7.See your authorized dealer for recommendations of available weights to improve stability.

*This limit was determined per CEN Standard EN 836:1997, Section

5.2.2and is based on the EN 836 Stability Test procedure described in Section 4.2.4.2. The 15 degree “limit of stability” is equal to 50% of the angle at which machine lift-off occurred in static tests. Actual dynamic stability may vary depending on operating conditions.

 

 

Operator Safety

 

 

 

 

 

 

Do Not

 

1.

Avoid starting, stopping, or turning on a slope. If

Safety

 

tires lose traction (i.e. machine stops forward

 

motion on a slope), disengage the blade(s) (PTO)

 

 

and drive slow off the slope.

 

2.

Do not turn on slopes unless necessary, and then,

 

 

turn slowly and gradually uphill, if possible. Never

 

 

mow down slopes.

 

3.

Do not mow near drop-offs, ditches, or

 

 

embankments. The operator could lose footing or

 

 

balance or mower could suddenly turn over if a

 

 

wheel is over the edge of a cliff or ditch, or if an

 

 

edge caves in.

 

4.

Do not mow on wet grass. Reduced footing or

 

 

traction could cause sliding.

 

5.

Do not try to stabilize the unit by putting your foot

 

 

on the ground. (ride-on units)

 

6.

Do not mow excessively steep slopes.

 

7.

Do not use grass catcher on steep slopes.

 

8.

Do not mow slopes if you cannot back up them.

 

TOWED EQUIPMENT (RIDE-ON UNITS)

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendations for weight limit for towed equipment and towing on slopes. See attaching a trailer under OPERATION.

3.Never allow children or others in or on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

6.Do not shift to neutral and coast down hill.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of another responsible adult.

2.Be alert and turn unit off if children enter the area.

3.Before and during reverse operation, look behind and down for small children.

4.Never carry children, even with the blade(s) off. They may fall off and be seriously injured or interfere with safe unit operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

5.Never allow children to operate the unit.

6.Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

EMISSIONS

1.Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

2.Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

7

Image 9
Contents Briggs & Stratton Power Products Group, LLC 5100806 DescriptionModel Number Date Purchased Table of Contents Operating Safety Slope Operation Roll Bar Use Fuel and Maintenance Operation TrainingPreparation Towed Equipment RIDE-ON Units Slope OperationChildren EmissionsIgnition System Gasoline Models Service and MaintenanceOperational Warnings Roll BAR InstructionsInspection and Maintenance of the Roll BAR Seat Belt Identification Tag Identification NumbersSafety Decals Safety Interlock System North American Safety IconsOperational Safety Checks Ignition Switch Seat Adjustment LeverControl Functions Ground Speed LeversHour Meter / Maintenance Reminder PTO Power Take Off SwitchWater Temperature Gauge Throttle ControlChecks Before Starting General Operating SafetyStarting the Engine Stopping the RiderPushing the Rider by Hand Smooth Travel Zero Turn Driving PracticeForward Travel Practice Reverse Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a Corner Practice Turning In PlaceExecuting Turns TurningMowing Recommendations MowingHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods When and How Often to MowMowing Patterns Proper Broadcast MowingProper Mulching Attaching a TrailerTo lower the roll bar Raise & Lower the Roll BARTo raise the roll bar Keep roll bar in the raised position and use seat beltStarting After Long Term Storage StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysRider Maintenance Safety ItemsEngine Maintenance Before Every Spring Each 100 250 Fall Use HoursChecking / Adding Fuel Check Tire PressuresFuel Filter Change OIL & FilterCheck Hydraulic OIL Level Hydraulic OIL Filter ChangeChange Interval Every 500 Hours Filter Part Number Change Engine Coolant Clean Radiator & Screen Check Engine Coolant LevelPressurized System Lubrication GreaseOil Battery Maintenance Cleaning the Battery and CablesANTI-SCALP Deck Casters Removing the Blade Servicing the Mower BladesRegular Maintenance Troubleshooting the Rider Troubleshooting WarningRider Troubleshooting Troubleshooting the MowerStreaking Troubleshooting Common Cutting ProblemsSeat Adjustment Seat Adjustment Suspension SeatGround Speed Control Lever Adjustment Speed Balancing Adjustment Neutral AdjustmentTo Reduce the Speed of the Faster Wheel Parking Brake Adjustment RETURN-TO-NEUTRAL AdjustmentTo adjust the spring pre-load Suspension AdjustmentBlade Brake Check PTO Clutch AdjustmentCutting Height Adjustment Foot Pedal AdjustmentTo adjust pedal position Outer Rod . Adjust the Inner & Outer Lift Rods Deck Lift ROD Timing AdjustmentInner Rod Outer RodDeck Lift Spring Deck Leveling AdjustmentHydraulic Pump Drive Belt Replacement Mower PTO Belt 72 Mower Deck Nut Stationary Idler Pulley Mower Belt ReplacementChecking Battery Voltage Battery ServiceCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryMake Certain Vehicles do not Touch This HOOK-UP for Negative Ground VehiclesEngine DimensionsChassis TransmissionsFerris Limited Warranty Belts and Blades TractorMower Deck

5900612, 5900613, 5900611, 5900716, 5900752 specifications

Briggs & Stratton is a leading manufacturer of small engines, known for their reliability and performance in a variety of applications. Among their extensive range of products, the model numbers 5900752, 5901184, 5900753, 5900611, and 5900613 represent a collection of essential components designed to enhance engine efficiency and user experience.

The Briggs & Stratton 5900752 is recognized for its high-quality air filter. This filter is engineered to trap dust and dirt effectively, ensuring that only clean air enters the engine. A clean air intake is crucial for optimal performance and longevity of the engine, as it prevents wear and tear on internal components. Its design allows for easy installation and maintenance, making it user-friendly for homeowners and professionals alike.

The 5901184 is a fuel tank assembly designed for enhanced durability and a consistent fuel supply. This component is vital for maintaining stable engine performance, minimizing fuel leakage, and ensuring the integrity of the engine system. The material used in its construction is resistant to corrosion, which is critical for longevity, especially in outdoor equipment exposed to various environmental conditions.

The 5900753 represents a high-performance carburetor that plays a significant role in the mixture of air and fuel. Its precision-engineered design allows for efficient combustion, resulting in robust engine performance. This carburetor is built to handle fluctuations in load, ensuring that the engine runs smoothly under different operating conditions.

The Briggs & Stratton 5900611 and 5900613 series are vital components known for their ignition systems. These components contribute to reliable spark generation, which is essential for engine starting and operation. The enhanced ignition efficiency not only boosts engine starts but also promotes fuel efficiency and reduces emissions, aligning with the growing demand for environmentally conscious products.

Overall, the features and technologies present in the Briggs & Stratton 5900752, 5901184, 5900753, 5900611, and 5900613 highlight the company’s commitment to quality, performance, and user-centered design. With a focus on reliability and ease of use, these components are engineered to meet the needs of various applications, from residential lawn care to commercial landscaping. As part of Briggs & Stratton's extensive catalog, these components are essential for maintaining optimal engine performance and ensuring a seamless user experience in the field.