Briggs & Stratton 1695284 manual Hitch Installation, Left View Back View

Page 7

Hitch Installation

B

 

 

B

A

A

 

D

 

F

 

C

E

G

H

 

J

 

I

Left View

Back View

Figure 4. Install Hitch Assembly

 

 

A. Frame

F. Nut, Nylock, Flanged 3/8-16

B. Hitch Assembly

G. Nut, Nylock, Flanged 5/16-16

C. Debris Guard

H. Nut, 1/2-13

D. Capscrew, Debris Guard, 3/8-16

I.

Nut, 3/8-16

E. Capscrew, Seat Deck Support, 5/16-18

J.

Rear Transmission Support

HITCH INSTALLATION

Hitch Installation

1.Remove 5/16-16 nut (G, Figure 4) from seat deck support capscrew (E).

2.Remove 3/8-16 nut (F) from rear debris guard capscrew (D).

3.Remove 1/2-13 nut (H) from rear of frame (A).

4.Remove 3/8-16 nut (I) from rear transmission support (J).

5.Attach hitch assembly (B) to frame (A) sliding rear of hitch flush with frame.

6.Finger tighten 3/8-16 nut (F), 5/16-16 nut (G), 1/2-13 nut (H) and 3/8-16 nut (I).

7.Tighten 3/8-16 nut (F) and 5/16-16 nut (G) first, then 1/2-13 nut (H) and 3/8-16 nut (I).

5

Image 7
Contents 50 2-Bin Bagger OPERATOR’S ManualThis page Intentionally Blank Table of Contents Safety Decals Safety Rules InformationGeneral Operating Instructions Counterweight Installation Initial InstallationInstall Blowout Baffles Left View Back View Hitch InstallationHitch Installation Hitch InstallationBag Support Installation Bag Support and Cover InstallationBag Installation and Tube Assembly Chute Installation Chute and Tube InstallationThis page Intentionally Blank Installation Normal Installation & RemovalRemoval Normal Removal