Black & Decker BV3100R instruction manual Blower Mode Assembly, Operation, Tube Assembly Figure a

Page 5

BLOWER MODE ASSEMBLY

NOTE: Ensure the blower is switched off and disconnected from the power supply before attaching or removing the blower tubes. The tube assembly must be assembled to the housing before use.

TUBE ASSEMBLY (FIGURE A)

• To attach the two piece blower tubes to the blower, line up the tube with the blower housing as shown in figure A. Push the tube into the blower housing until the lock lever engages the lock hole in the tube.

• To remove the tube depress the lock button and slide the tube off the housing neck.

A

VACUUM MODE ASSEMBLY

VACUUM TUBE ASSEMBLY (FIGURES B, C, D)

NOTE: Ensure the vacuum is switched off and disconnected from

 

the power supply before attaching

 

 

 

B

 

or removing the vacuum tube. The

 

vacuum tube and collection bag must be

 

 

 

assembled to the housing before use.

 

 

 

The vacuum tubes must be assembled

 

 

 

together before use.

 

 

 

 

B1

 

• Align the notches and the tabs on the two

 

 

 

tube pieces. (figure B)

 

 

 

• Push the lower tube firmly into the upper

 

 

 

tube, until the tabs click into place. (Never

 

 

 

operate apart).

 

 

 

 

 

 

 

• Unlatch the fan cover from the bottom of the vacuum housing by pressing the

release tab (located near the front of the vacuum housing) and pulling the

cover open like a lid (figure B1).

C

NOTE: This interlock will disconnect the

electric circuit automatically and the unit will

 

not operate.

 

• Attach the vacuum tube assembly to the

C1

fan inlet on the vacuum housing (figure

 

C), insert the vacuum tube support tab

 

into the assembly slot (figure C1) on the

 

blower housing.

 

• Push the lock button to lock the vacuum tube in place.

NOTE: This interlock will connect the electric circuit automatically and the unit

will operate.

 

COLLECTION BAG ASSEMBLY (FIGURE D)

NOTE: Ensure the vacuum is switched off and

D

disconnected from the power supply before

attaching or removing the collection bag.

 

• Remove blower tube if attached.

 

• Push the collection bag on to the blower

 

housing until the lock lever engages the lock

 

hole as shown in figure D.

 

OPERATION

ALWAYS WEAR SAFETY GLASSES. WEAR A FILTER MASK IF THE OPERATION IS DUSTY. USE OF RUBBER GLOVES AND SUBSTANTIAL FOOTWEAR IS RECOMMENDED WHEN WORKING OUTDOORS. FOR HOUSEHOLD USE ONLY.

WARNING: CUT HAZARD. When turning the tool off for tube installation or any other reason, wait 10 seconds for the fan to stop rotating before disassembly.

•Do not use in vacuum mode without the vacuum tubes and collection bag in place.

•Always switch off and remove the plug from the electrical supply when:

•Changing from blower to vacuum.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Please Read Before Returning this Product for ANY Reason General Safety Warnings Instructions for ALL Tools Table of ContentsImportant Safety Warnings & Instructions Servicing of Double Insulated Appliances Chart Safety Rules and Instructions Extension CordsComponents To determineTube Assembly Figure a Blower Mode AssemblyVacuum Tube Assembly Figures B, C, D Collection BAG Assembly Figure DExtension Cord Retainer Figure F Switching on and OFF Figure EBlower Operation Cleaning and Storage MaintenanceVacuum Operation Unplugging the VacuumProblem Possible Cause Possible Solution AccessoriesTroubleshooting Service Information Full TWO-YEAR Home USE Warranty Mode D’EMPLOI DE Souffleurs ET AASPIRATEURS-SOUFFLEURS De graves blessures Avertissement Importantes Mesures de SécuritéBlessures mineures ou modérées Lire et respecter toutes les mesures de sécuritéNE PAS tenter de débloquer l’outil avant de le débrancher Faire Très Attention lorsqu’on travaille dans des escaliers’ASSURER QUE LES ENFANTS, LES Observateurs Du métal, du verre cassé ou d’autres objets semblables’assemblage de la souffleuse ou du tube d’aspiration Mesures de sécurité fiche polariséeAssemblage Pour LE Mode Aspirateur Assemblage Pour LE Mode SouffleurModule DE Tube Figure a Module Tube D’ASPIRATIONSéparés Enfoncer la languette de dégagement pour FonctionnementModule DE SAC Collecteur Figure D Retirer le tube de soufflage s’il est fixé à l’appareilFonctionnement DE Mode Aspirateur Fonctionnement DE Mode SouffleurEntretien AccessoiresInformation SUR LES Réparations Nettoyage ET RangementDépannage Problème Cause possible Solution possiblePage Manual DE Instrucciones DE Barredora / Aspiradora Para reducir el riesgo de lesiones SeguridadPautas DE SEGURIDAD/DEFINICIONES Normas Generales DE SeguridadTenga Mucho Cuidado cuando limpie en escalones Conserve Estas InstruccionesServicio a aparatos con doble aislamiento Ensamblaje EN Modo DE Aspiradora Componentes Ensamblaje EN Modo DE SopladoraEnsamblaje DEL Tubo Figura a Deben ensamblarse antes del usoEnsamblaje DE LA Bolsa DE Recolección Figura D OperaciónLa unidad funcionará Funcionamiento Como Aspiradora Funcionamiento Como SopladoraDispositivo DE Retención DEL Cable Figura F QUÉ Debe Hacerse SI LA Unidad SE Obstruye FiguraAccesorios MantenimientoInformación DE Mantenimiento Limpieza Y AlmacenamientoCentro de mantenimiento Black & Decker Detección DE ProblemasProblema Causa posible Solución posible Garantía Completa DE DOS Años Para USO EN EL Hogar Product Infomation · Identificación DEL Producto Page Solamente Para Propositos DE Mexico
Related manuals
Manual 9 pages 60.83 Kb

BV3100R, BV3100 specifications

The Black & Decker BV3100 is a highly versatile and efficient leaf blower that has garnered attention in the world of outdoor maintenance. Known for its reliable performance and user-friendly features, the BV3100 is designed to make yard work a breeze, particularly during the fall when leaves become a significant concern for homeowners.

One of the standout features of the BV3100 is its powerful 12 amp motor, which allows the user to achieve an impressive air speed of up to 210 mph. This capability makes it ideal for tackling stubborn debris, whether it be dry leaves, grass clippings, or even small twigs. Its high air speed ensures that you can clear your yard quickly and effectively, saving time and reducing effort.

The BV3100 does not just stop at blowing leaves. It also boasts a vacuum function, allowing users to easily switch between blowing and vacuuming with a simple adjustment. This dual functionality is particularly valuable for those who want to keep their yards looking pristine without the need for multiple tools. The vacuum feature also includes a mulching capability, shredding leaves into smaller pieces that can be easily composted or disposed of. This not only reduces the volume of waste but also enriches garden soil when reused.

User comfort and convenience are also prioritized in the design of the BV3100. It features an ergonomic handle with a soft grip, ensuring comfortable use for extended periods. The lightweight design of the blower ensures that users can maneuver it easily, even when tackling larger areas. The BV3100 is equipped with a built-in cord retention system, preventing accidental disconnections during operation, which adds to the ease of use.

Moreover, the BV3100 emphasizes user safety with its safety switch feature. This provides an added assurance, especially when operating the blower in more challenging outdoor conditions. The device operates quietly compared to some of its counterparts, making it a great option for residential areas where noise may be a concern.

In conclusion, the Black & Decker BV3100 is a reliable and efficient leaf blower that combines powerful performance with user-friendly features. Its versatility in blowing and vacuuming, coupled with advanced technologies and ergonomic design, makes it an essential tool for maintaining a beautiful yard. Whether you are a seasoned gardener or a homeowner looking to keep your property tidy, the BV3100 is a robust choice that will meet your outdoor maintenance needs.
Top Page Image Contents