Operating The System, Demonstration mode, Controls

English

CONTROLS

°TIMER

–to switch on or off timer.

¤DISPLAY (not functional for this model)

³B

–to switch the system to standby mode.

OPERATING THE SYSTEM

CD CHANGER
FRONT BACK								NEWS	DIM
								T.A.	SLEEP
REC HSD	TRACK	PRESET REPEAT	AM LW	MW FM	STEREO	PROGRAM	TIMER SHUFFLE
INCREDIBLE
SURROUND
LOUDNESS
FLAT
SOUND	60Hz	250Hz	500Hz	1KHz	2KHz	4KHz	8KHz	VOLUME

3 CDC				DIGITAL STEREO HIFI SYSTEM
3 CDC
	▲	PRESET ▲	A•B
				DIGITAL CONTROL
TUNER	SEARCH/TUNE		PLAY /	DIM	PROG/A.REV REC/CD SYN
		PRESET	STOP		FLAT
TAPE		BASS			TREBLE
			INCREDIBLE	LOUDNESS
			SURROUND	LOUDNESS

CDR/AUX

CLOCK/

TIMER

DUBBING

NORMAL•FAST

DOLBY B NR

Notes for remote control:

–First select the source you wish to control by pressing one of the source select keys on the remote control (e.g. CD, TUNER, TAPE 1/2 or AUX).

–Then select the desired function (ƒ, ’, ‘, etc.).

Important:

Before you operate the system, complete the preparation procedures.

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system. When the system is switched on for the first time, the demonstration mode will start automatically.

Notes:

–During the demonstration, if you press any source (or standby-on) button, the system will switch to the respective mode (or standby).

–When the system is switched to standby mode, the demonstration will resume five seconds later.

To stop the demonstration mode

•Press and hold STOP (on the system only) for five seconds when the system is in demonstration mode.

ªThe demonstration will stop.

ª"DEMO OFF" is displayed.

ªThe system will switch to standby mode.

Note:

–Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.

To start the demonstration mode

•Press and hold STOP (on the system only) for five seconds when the system is in standby mode.

ª The demonstration will begin.