Easy Set
EASY SET allows you to store all available radio stations automatically.
1 Press and hold STANDBY•ON (on the |
system only) for five seconds; when |
the system is in standby or |
demonstration mode. |
ª “EASY SET” will be displayed, |
and followed by “TUNER” and then |
“AUTO”. |
ª EASY SET will start searching for all |
Switching the system ON
•Press STANDBY•ON (on the system only), 3 CDC, TUNER, TAPE or CDR/ AUX.
You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.
Switching the system to standby mode
Dim Mode
This feature allows you to select 4 different modes for display brightness.
•Press DIM to select the desired screen display brightness: DIM 1, DIM 2, DIM 3 or DIM OFF.
ªThe DIM display lights up.
ª“DIM 1”, “DIM 2” , “DIM 3” or “DIM OFF” will be displayed depending on the mode selected.
OPERATING THE SYSTEM
BALANCE L/R (on remote control only) Adjust the sound balance of the left and right speakers.
•Press BALANCE L/R on the remote control to adjust the sound of the front Left or Right speaker respectively.
ªThe display will show “LEFT X“, “BALANCED“ or “RIGHT X“.
Note:
– "X" denotes the sound level.
English
radio on FM band and then followed |
by radio stations on AM band. |
ª All available radio stations with |
sufficient signal strength will be |
stored. Up to 40 presets may be |
stored. |
Notes:
–EASY SET will start with the FM band, if there are still presets available, the system will continue to store the AM band.
–When EASY SET is used, all previously stored radio stations will be replaced.
–The last preset radio station will appear on the display when EASY SET is completed.
•Press STANDBY•ON again or Bon the remote control.
ªThe system will switch to standby mode.
Selecting the Source
•Press the respective source selection button: 3 CDC, TUNER, TAPE or CDR/ AUX.
ªThe display indicates the selected source.
Note:
–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals.
Volume Adjustment
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.
MUTE (on remote control only)
This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence.
•Press MUTE on the remote control to switch off the sound.
ª “MUTE” will be displayed.
•Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.
Digital Control
The Digital Control feature enables you to adjust the system to suit your type of music.
INCREDIBLE SURROUND
Normal stereo sound is determined by the distance between the front speakers. When Incredible Surround is switched on, it magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect.
•Press INCREDIBLE SURROUND to switch on.
ªThe INCREDIBLE SURROUND display lights
up.
ª“INCREDIBLE SURROUND ON” will be displayed.
To switch off Incredible Surround
•Press INCREDIBLE SURROUND again.
ª The INCREDIBLE SURROUND display is
switched off.
ª “INCREDIBLE SURROUND
OFF” will be displayed.
15