Marantz MV5100 manual Time every week, If you forget to turn off the VCR

MV5100 27-84 7/21/00 10:59 AM Page 39

Timer Recording with the VCR Plus+ Programming System (cont’d) 39

5

Press the OK/STATUS button. If the VCR PLUS+ and CABLE/TV channel lists appear on the screen, the CABLE/TV channel has not been set for the VCR PLUS+ channel of the program you have set in step 4. Press the Number buttons to enter the CABLE/TV channel number from your list on page 36, then press the OK/STATUS but- ton.

6

•If you want to record the program one time only, go to step 7. You also may press the Number 8/DAILY or Number 9/WEEKLY button repeatedly to select a ONE TIME PROGRAM.

•If you want to record the program daily, press the Number 8/DAILY button so that DAILY PROGRAM appears at the top of the screen. The VCR will record a pro- gram every day from Monday through Friday, starting at the same time and recording for the same length of time.

•If you want to record the program every week, press the Number 9/WEEKLY button so that WEEKLY PROGRAM appears at the top of the screen. The VCR will record a pro- gram on the same day, at the same time, for the same length of

time every week.

DAILY PROGRAM (MON-FRI)

PROGRAM	1
CHANNEL +/– 12		CABLE/TV
START +/–	08:00	PM
STOP +/–	10:00	PM
REC SPEED	SLP
DATE +/–	06/21/00
	WEDNESDAY
DAILY: 8		WEEKLY: 9
CONFIRM: OK		END: TIMER

7

Press the ALT/SPEED button to select the tape speed. The selected tape speed, SP or SLP, will appear beside REC SPEED.

8

Press the OK/STATUS or TIMER button. PROGRAM WAS COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING should appear on the screen. (If PROGRAM NOT COMPLETED appears, begin again from step 1.) After five seconds, the on-screen display will disappear.

9

Press the POWER button to turn off the VCR.The VCR must be turned off for a timer recording to take place. The

rlight will appear on the display panel.The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in the VCR.

Turn off theVCR for a timer recording! Put a tape

in theVCR. Leave the Cable Box/DBS on.

	SAT/
	CBL/DBS			TV		VCR
9	VCR/TV		POWER		SMARTPICTURE
	QUICK PROGRAMMING
	1– +*		+ 2 ABC + 3 DEF
	START		STOP		DATE
	4 GHI - 5 JKL - 6 MNO
	VPS/PDC		DAILY		WEEKLY		6
	7PQRS		0		9WXYZ
7	SPEED		DBS/SAT
	ALT				CLEAR
			STILL/SLOW
	-				..........	+
	REW					FF
			PLAY
			STOP				5
	VOL		OK/STATUS			CH
			MENU
			TIMER				8
	TURBO	AUDIO/		SKIP		TAPE
	TIMER	MUTE		SEARCH MANAGER
	JOG/SHTL					REC /OTR
	REV					FWD

Helpful Hints

•Do not select DAILY at step 6 if the VCR Plus+ recording you chose is on a Saturday or Sunday.The recording will not occur, even though the VCR may accept the way you programmed the recording.

•To exit the VCR Plus+ programming system at any step, press the TIMER button.

•If the timer recording you just pro- grammed overlaps another timer recording, PROGRAM NOT COM- PLETED/PROGRAM OVERLAP will appear. Details are on page 46.

•If you forget to turn off the VCR,

PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording is set to begin.To remove the message, press the CLEAR button.

•To check your timer recordings, see page 45.