Marantz MV5100 manual Turning on Your VCR, Press the VCR button, then press the Power button

MV5100 04-26 7/21/00 10:58 AM Page 10

10 Turning on Your VCR

•Before turning on your VCR, make sure there are batteries in the remote control and the VCR,TV, and Cable Box/DBS (if applicable) are connected.

•The menus will continue to appear every time you turn on the VCR until you complete the steps on pages 10-11.

•If you want to set up the Controller now, you must first connect the Controller. See page 50 before continuing.

•Leave the Cable Box turned on if you plan to set up the Cable Box Controller now.

•If you plan to set up the Controller now, set the Cable Box to a channel other than channel 09.

•Read through these steps before you begin; the process will be easier if you familiarize yourself with this information before beginning.

1

Press the VCR button, then press the POWER button.

2

Turn on the TV. Set it to channel 3 or 4, whichever chan- nel the CH3/CH4 switch on the back of the VCR is set to (or your Cable Box/DBS output channel, if applicable).

The menu shown below will appear.

➔ENGLISH ESPAÑOL FRANÇAIS

SELECT: 89	CONFIRM: OK
END: MENU

3

Press the PLAY 8 or STOP 9 button to select the lan- guage of the on-screen displays and menus.

4

Press the OK/STATUS button. The menu shown below will appear.

CABLE BOX CONTROLLER

OFF
A OFF	CH.=CHANNEL
ON CH. 2	ON CH. 7
ON CH. 3	ON CH. 8
ON CH. 4	ON CH. 9
ON CH. 5 ON A/V FRONT
ON CH. 6	ON A/V REAR
SELECT: , 9	CONFIRM:OK
END:MENU

2 Turn on the TV.

SAT/								1
CBL/DBS				TV			VCR
VCR/TV			POWER		SMARTPICTURE
	QUICK PROGRAMMING
1– +*			+ 2 ABC + 3 DEF
START			STOP			DATE
4 GHI - 5 JKL - 6 MNO
VPS/PDC			DAILY			WEEKLY
7PQRS			8 TUV			9WXYZ
SPEED			DBS/SAT
ALT			0			CLEAR
-			STILL/SLOW				+
	..........				..........
REW							FF	3
			PLAY
			STOP
VOL			OK/STATUS				CH	4
			MENU
			TIMER
TURBO		AUDIO/		SKIP			TAPE
TIMER		MUTE		SEARCH MANAGER
JOG/SHTL							REC /OTR
REV							FWD

Helpful Hints

•Auto or – – : – – may appear on the display panel until the clock is set.

•If you do not want to set up chan- nels now, press the MENU button at step 6.TUNER NOT SET will appear on the screen briefly.

•You may not set up channels at step 6 if you are using a Cable Box/DBS.