Marantz MV5100 manual Index Search, Press the Stop 9 button to cancel a Skip Search

MV5100 27-84 7/21/00 10:59 AM Page 61

Index Search

When you make a recording, the VCR automatically places an index code at the beginning of the recording. Essentially, an index code is a type of “book- mark” for your tape.This feature is useful if you have several different pro- grams recorded on a single tape.

Fast forward or rewind to the next or previous index code on the tape by following the steps below.

1

Press the VCR button. Make sure the VCR is in VCR position. (The VCR light will appear on the display panel when the VCR is in VCR position.) If

the VCR light does not appear, press the VCR/TV button once.

2

Insert a tape in the VCR. Press the --7/STILL/SLOW + button to fast forward to the next index code on the tape. Or, press the 4/STILL/SLOW - button to rewind to the previous index code on the tape (or to the beginning of the current recording).Wait for the VCR to fast forward or rewind the tape.When the index code is reached, tape playback will begin automatically.

NOTE:You may press an --7/STILL/SLOW + button repeatedly to skip over multiple recordings. For example, if you want to fast forward past four recordings, press the --7/STILL/SLOW + but- ton four times. INDEX 4 will appear in the bottom right corner of the screen.The index codes will count down on the screen as the search progresses. (ON SCREEN MODE can not be set to OFF. Details are on page 26.)

Skip Search

This function enables you to skip forward 30 seconds at a time during tape playback.

1

During tape playback, press the VCR button, then press the SKIP SEARCH button. Each time you press the SKIP SEARCH button, the VCR will skip forward 30 seconds, then resume normal playback. You can skip up to two minutes at a time using Skip Search.

Search Options 61

SAT/

CBL/DBS TV VCR

VCR/TV POWER SMARTPICTURE

QUICK PROGRAMMING

1– +* + 2 ABC + 3 DEF

START		STOP	DATE
4 GHI - 5 JKL - 6 MNO
VPS/PDC		DAILY	WEEKLY
7PQRS		8 TUV	9WXYZ
SPEED		DBS/SAT
ALT		0	CLEAR
-	STILL/SLOW			+
	..........		..........
REW				FF
		PLAY

STOP

VOL OK/STATUS CH

MENU

TIMER

TURBO AUDIO/ SKIP TAPE

TIMER MUTE SEARCH MANAGER

JOG/SHTL	REC /OTR
REV	FWD

Helpful Hints

•To stop an Index Search that is in progress, press the STOP 9 button.

•The VCR does not place an index code at the point where a recording is paused, then resumed.

•INDEX may flash on the screen briefly when you begin a recording.

•Press the STOP 9 button to cancel a Skip Search.

•If the end of the tape is reached dur- ing a Skip Search, the VCR will cancel the search and rewind the tape.

•While the tape is searching for the tape number after inserting the tape, the Index Search will not function.