Marantz MV5100 manual Rerecording Tape Duplication, Audio and video cables are not included

MV5100 27-84 7/21/00 10:59 AM Page 48

48 Rerecording (Tape Duplication)

The instructions on this page show you how to copy tapes. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-6. (You may use the AUDIO and VIDEO or S-VIDEO In jacks on the front of VCR 2 instead if you prefer.)

	VCR 1		VCR 2	3) Use an RF coaxial cable to connect the RF OUT
	Playing VCR		Recording VCR	Jack on VCR 2 to the TV’s ANTENNA IN Jack.
		LP 20917-003			LP 20917-003
	OUT IN		VIDEO	OUT IN	VHF/UHF
VIDEO		VHF/UHF
					ANTENNA IN
		ANTENNA IN	(MONO)

L			L
			S VIDEO	CABLE BOX
S VIDEO	CABLE BOX
			AUDIO
AUDIO			R	CH3 CH4
R		CH3	CH4	TV OUT
			TV OUT
OUT			OUT IN
				1) Use audio cables to connect the
			S-Video cables	AUDIO OUT Jacks on VCR 1 to the
				AUDIO IN Jacks on VCR 2.
				2) Use a video cable to connect the
			audio cables	VIDEO OUT Jack on VCR 1 to the
				VIDEO IN Jack on VCR 2. (Or, to
			video cable	improve picture quality, you may connect
				an S-Video cable to the S-VIDEO OUT
				jack on VCR 1 and to the S-VIDEO IN
				jack on VCR 2 instead.

1

VCR 1 will play your tape. Insert a prerecorded tape in VCR

1.If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.

2

VCR 2 will record your tape. Insert a blank tape in VCR 2.

Make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

3

Turn on the TV; set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.

4

Point the remote control at VCR 2. Press the VCR button, then press the Number button 0. Press the CH(annel) 8/9 button so that A/V IN FRONT (for jacks on the front) or A/V IN REAR (for jacks on the back) appears on the screen.

5

Point the remote control at VCR 2. Press the ALT/SPEED button to select SP or SLP.

6

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time. The \ light will appear

on the VCR 2 display panel.

Helpful Hints

•Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copyright protec- tion, it may not record clearly.

•Audio and video cables are not included.

•To stop copying tapes, press the STOP/EJECT button on VCR 2, then press the STOP/EJECT button on VCR 1.

•If you connect the audio and video or S-video cables to the AUDIO/VIDEO or AUDIO/S-VIDEO IN jacks on the front of VCR 2, you must select A/V IN FRONT at step 4.Then, select VIDEO or S-VIDEO at FRONT A/V INPUT in the VCR Set Up menu. If you connect the audio and video or S-Video cables to the AUDIO/VIDEO IN or AUDIO/S- VIDEO IN jacks on the back of VCR 2, you must select A/V IN REAR at step 4.Then select VIDEO or S- VIDEO at REAR A/V INPUT in the VCR Set Up menu.