Marantz MV5100 manual Turbo Timer, Insert a tape 1into the VCR

MV5100 27-84 7/21/00 10:59 AM Page 44

44 Turbo Timer

This function allows you to set a timer recording without using the on-screen menus. Complete each step within one minute of the previous step. Use Turbo Timer to set a timer recording within the next 24 hours only.

1

Insert a tape into the VCR and press the TURBO TIMER button on the remote control. The current time will appear on the display panel. (It will not appear on the TV screen.)

If “Err” (error) appears, either the clock is not set or you have set eight timer recordings already.The VCR will not let you set more than eight timer recordings.

SLP

VCR

2

To set the START time, press the PLAY 8 or STOP 9 button until the desired start time appears on the display panel. Every time you press a button, the start time changes in one-minute increments. If you press and hold a button, the start time changes in 30-minute increments.

When the correct START time appears, press the OK/STATUS button.

SLP

VCR

3

The START time will continue to appear on the display panel. To set the STOP time, press the PLAY 8 or STOP 9 button. Every time you press a button, the stop time changes in one- minute increments. If you press and hold a button, the stop time changes in 30-minute increments. When the correct STOP time appears, press the OK/STATUS button.

SLP

VCR

4

The current channel number will appear on the display panel. To select the channel you want to record, press the PLAY 8 or STOP 9 button. Every time you press a button, the channel changes once. If you press and hold the button, the channels will change rapidly. When the correct channel number appears, press the OK/STATUS button.

SLP

VCR

5

The normal display will appear, and the r light will appear on the display panel.

Press the POWER button to turn off the VCR. Leave the Cable Box/DBS on if applicable.

	Insert a tape
	1into the VCR.
	SAT/
	CBL/DBS				TV			VCR
	VCR/TV			POWER		SMARTPICTURE
		QUICK PROGRAMMING
	1– +*			+ 2 ABC + 3 DEF
	START			STOP			DATE
	4 GHI - 5 JKL - 6 MNO
	VPS/PDC			DAILY			WEEKLY
	7PQRS			8 TUV			9WXYZ
	SPEED			DBS/SAT
	ALT			0			CLEAR
	-			STILL/SLOW				+
		..........				..........
	REW							FF
2-4				STOP
				PLAY
	VOL			OK/STATUS				CH
				MENU
1				TIMER
	TURBO		AUDIO/		SKIP TAPE
	TIMER		MUTE		SEARCH MANAGER
	JOG/SHTL							REC /OTR
	REV							FWD

Helpful Hints

•The Program Overlap Warning does not function with Turbo Timer.The timer recording with the earliest start time will record.Then, the remaining portion of the later recording will record.

•To exit Turbo Timer mode at any time, press the TURBO TIMER button.

•DAILY or WEEKLY timer recordings can not be set with Turbo Timer.

•Tape speed can be selected at any time during steps 2-4 by pressing the ALT/SPEED button.

•If you are using a DBS with the Controller, and have selected a channel number which is between 100-199, you need to specify whether the chan- nel is for Cable TV or Satellite TV (DBS). Press the Number 0 (DBS) but- ton repeatedly to select either the DBS mode (“D” indicator appears on the display panel), or CABLE/TV (no indica- tor display appears next to channel number) for the proper channel mode.